carb
-
- Member
- Posts: 43
- Joined: 08:34 pm Jan 25 2017
- Country: UNITED STATES
carb
where is the best place to get my carb punched up and or rebuilt ,,tuned up,,i am still having problems at 3/4 to full throttle loosing power ,sounds like it is missing,,cutting out not bogging down like a loss of fuel,like maybe a in suffecent spark or well I just can not figure it out ,,will not wind out quickly ,,will not even bring front tire up in 3rd gear ,,I have hade several other 220s and 200s and they were all much faster than thin one is ,,I have cleaned the carb ,,jetted it to a 50 ,put new reeds ,,compression is 180 lbs ,,has a domed piston in it
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Re: carb
Best place is RB Designs, link is on the left side of the home page
Sent from my KIW-L24 using Tapatalk
Sent from my KIW-L24 using Tapatalk
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.
-
- Member
- Posts: 43
- Joined: 08:34 pm Jan 25 2017
- Country: UNITED STATES
Re: carb
don't see it ?6 Riders wrote:Best place is RB Designs, link is on the left side of the home page
Sent from my KIW-L24 using Tapatalk
- SS109
- KDXRider.net
- Posts: 5818
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
carb
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
-
- Member
- Posts: 43
- Joined: 08:34 pm Jan 25 2017
- Country: UNITED STATES
carb
SS109 wrote:http://www.rb-designs.com/thanks ,,never thought of looking at either one ,,will do that tonight
Check your plug wire and the silencer.
-
- Member
- Posts: 43
- Joined: 08:34 pm Jan 25 2017
- Country: UNITED STATES
Re: carb
looks like a good place to get it done thanks ,,, what about the head mod they offer ? any one have it done ? and does it make a big improvement ?garycrafton wrote:don't see it ?6 Riders wrote:Best place is RB Designs, link is on the left side of the home page
Sent from my KIW-L24 using Tapatalk
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: carb
I don't see where you posted what model your bike is, and I'm too lazy to search your posts to see if you have it listed somewhere else. I have the head mod on my 200, it made some difference. For the 220 it's a pretty drastic change though. If you have a 200 and you're sending the carb in anyway, then why not.? If you have a 220, then definitely do the head mod.
-
- Member
- Posts: 43
- Joined: 08:34 pm Jan 25 2017
- Country: UNITED STATES
Re: carb
OK,, it is a 1998 kdx 220 ,,gonna send them both in ,,thanksJulien D wrote:I don't see where you posted what model your bike is, and I'm too lazy to search your posts to see if you have it listed somewhere else. I have the head mod on my 200, it made some difference. For the 220 it's a pretty drastic change though. If you have a 200 and you're sending the carb in anyway, then why not.? If you have a 220, then definitely do the head mod.
- Molly's 70
- Platinum Member
- Posts: 569
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
carb
I have a 2003 KDX 220. Sent my head & carb to RB designs several years ago. Made a great improvement. Still happy.
If you lend someone $20, and never see that person again, it was probably worth it.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: carb
It does make a difference, and it is cheap. If you're sending your carb in you'll be down anyway, so I would send the head with. If you are buying a new carb outright, I might not bother with the head mod. I had him do my head, and I do not regret it at all. Cleans things up a bit all over.