KDX 200
-
- Member
- Posts: 20
- Joined: 10:10 pm Nov 09 2016
- Country: United States
KDX 200
SO i bought my kdx from a friend and he said it was a 94 and I took his word for it since he had 3 other machines and ride a lot but i ran the vin and it is a 90 kdx. Little older than what i thought but same bike from 89-94. Was the only difference in these two bikes the front end? I believe 93 and 94 they went to 43 mm forks. Dont really matter though i guess since i have a 01 kx 250 front end for it. Just thought i would share this so in the future i will always run the vin no matter who i buy it from.
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: KDX 200
There are a couple of little differences over those years, water pump seal design and maybe a couple of other things that are small.
1993 - 1994 has UpSide Down, USD, forks. They have 41 mm inner tubes.
1993 - 1994 has UpSide Down, USD, forks. They have 41 mm inner tubes.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 20
- Joined: 10:10 pm Nov 09 2016
- Country: United States
KDX 200
OK thanks Jason I appreciate it very much. I have the 01 kx 250 front end and im getting ready to send it off to RB for the mod so i can just bolt it on. That should make a huge difference. So when i order bearing to send to rb since im using my steering stem do i buy the 90 kdx bearings or the 01 kx 250 bearings i am a little confused on that part.
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: KDX 200
The 1992+ KX125 / KX250 / KX250F / KX450F top bearing is too big to fit inside the head tube of the KDX / KLX / KX500 / (1991 and older KX125 / KX250)
You need KDX sized bearings to go in the KDX head tube.
You need KDX sized bearings to go in the KDX head tube.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 20
- Joined: 10:10 pm Nov 09 2016
- Country: United States
KDX 200
Ok thanks a lot man. Cant wait for summer i am ready to grip and rip. Illinois winters suck