What is this thing?
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
What is this thing?
Well guys I screwed up and sold my KDX 220. I thought I wanted to get something a little more modern and maybe move to a 4 stroke. It's been a few months now and I've been to look at a few bikes and ridden a couple different ones. I knew I screwed up pretty soon after I did it. The KDX is all the bike I need for my riding conditions and I'd have been better off putting a little money into the one I had vs buying something different.
It's too late now but I just came across another 04 220 on craigslist. He is asking $1400 which based on the pictures seems pretty fair, best of all it's really close to home. That is good because I've already wasted several hours driving across the state to look at bikes that turned out to be junkers. Anyway I was looking at the pictures and I wasn't sure what the thing is covering up the water pump? I knew it looked funny but I've never seen a KDX motor look like that.
It's too late now but I just came across another 04 220 on craigslist. He is asking $1400 which based on the pictures seems pretty fair, best of all it's really close to home. That is good because I've already wasted several hours driving across the state to look at bikes that turned out to be junkers. Anyway I was looking at the pictures and I wasn't sure what the thing is covering up the water pump? I knew it looked funny but I've never seen a KDX motor look like that.
Joey
2003 KDX 220R
2003 KDX 220R
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: What is this thing?
My guess would be some type of diy pump protector.
- Tyl3r
- Platinum Member
- Posts: 1338
- Joined: 06:51 pm Nov 26 2012
- Country: USA
- Location: SW Pennsylvania
Re: What is this thing?
Id think its worth a look, does look like a pump protector.
Has the stock piston been changed out? It doesn't look like its been messed with or abused. I'd probably go, shake the rear wheel and swingarm, and show him $1200 cash (with another $200 in my back pocket lol). I'd check for other signs of abuse, but seems fair, especially close to home. That is if it's as it looks... let us know!
Has the stock piston been changed out? It doesn't look like its been messed with or abused. I'd probably go, shake the rear wheel and swingarm, and show him $1200 cash (with another $200 in my back pocket lol). I'd check for other signs of abuse, but seems fair, especially close to home. That is if it's as it looks... let us know!
05 KX220 Hybrid all decked out
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
Re: What is this thing?
I know shaking the rear wheel checks for wheel bearings and linkage/swing arm bearings. If they are loose, is it hard or expensive to repair?
I know about the 220 piston and I don't know if it has been replaced but I have already taken that into consideration.
I may shoot him a lowball offer of $1000 and see if he bites but I'd probably give him his asking price if he can verify the top end and if I don't find anything else wrong.
Sent from my iPhone using Tapatalk
I know about the 220 piston and I don't know if it has been replaced but I have already taken that into consideration.
I may shoot him a lowball offer of $1000 and see if he bites but I'd probably give him his asking price if he can verify the top end and if I don't find anything else wrong.
Sent from my iPhone using Tapatalk
Joey
2003 KDX 220R
2003 KDX 220R
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: What is this thing?
Once you can get all the parts of the suspension off, swapping out the bearings isn't that difficult. You don't have to use a press, common tools work. These are from my hybrid but a KDX should be similar.JFortner5 wrote:I know shaking the rear wheel checks for wheel bearings and linkage/swing arm bearings. If they are loose, is it hard or expensive to repair?
example 1
example 2 scroll down
But, and it is a BIG BUT, getting the parts off can be a real pain if the PO hasn't serviced them periodically. The swing arm bolt is a common one that can be very difficult to remove if it is seized in place. You can do a search here or on TT and get an idea of what could be involved.
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
Re: What is this thing?
I went and looked at the bike in person today. It looks good and is cleaner than when the pictures were taken. I thought it had a stock pipe on it but that is actual an eline carbon fiber guard over an FMF Gnarly. That's a bonus and $200 I don't have to spend on a pipe. The radiators weren't smashed up and everything suspension wise felt tight. It started from dead cold with one kick.
Unfortunately it started pouring rain, but I rode the bike anyway. I didn't stay on it long because I was soaked instantly, but I rode it enough to shift up and down through the gears and check the brakes. I left it there because of the rain and I also stupidly forgot my ramp but I should be going to pick it up tomorrow.
Hopefully he won't sell it out from under me.
Sent from my iPhone using Tapatalk
Unfortunately it started pouring rain, but I rode the bike anyway. I didn't stay on it long because I was soaked instantly, but I rode it enough to shift up and down through the gears and check the brakes. I left it there because of the rain and I also stupidly forgot my ramp but I should be going to pick it up tomorrow.
Hopefully he won't sell it out from under me.
Sent from my iPhone using Tapatalk
Joey
2003 KDX 220R
2003 KDX 220R
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: What is this thing?
JFortner5 wrote: Hopefully he won't sell it out from under me.
that's what deposits are for
seriously though, hopefully he is a man of his word (provided he gave you his word)
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
Re: What is this thing?
I think he is. He told me he was raised to keep his word and that it would be there for me tomorrow. He had a guy offer him more than his asking price but he refused. Seems like a good guy to me.
Once it's in my possession tomorrow I'm going to go ahead and order the new piston and I'll probably strip the bike down for a good cleaning/inspection.
I can't wait
Sent from my iPhone using Tapatalk
Once it's in my possession tomorrow I'm going to go ahead and order the new piston and I'll probably strip the bike down for a good cleaning/inspection.
I can't wait
Sent from my iPhone using Tapatalk
Joey
2003 KDX 220R
2003 KDX 220R
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: What is this thing?
Nice pick up!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
Re: What is this thing?
Just to update I did buy the bike yesterday afternoon.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joey
2003 KDX 220R
2003 KDX 220R
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: What is this thing?
So was that plate a water pump protector?
- JFortner5
- Supporting Member
- Posts: 166
- Joined: 02:42 pm Aug 18 2013
- Country: USA
- Location: Helena, AL
Re: What is this thing?
Yes it is. I didn't have time yesterday to mess with it so hopefully today I'll start stripping it apart and giving it a good cleaning.
There's one pic of it in its new home. Please excuse my garage I'm in the process of building a shed.
Sent from my iPhone using Tapatalk
There's one pic of it in its new home. Please excuse my garage I'm in the process of building a shed.
Sent from my iPhone using Tapatalk
Joey
2003 KDX 220R
2003 KDX 220R
- KDXGarage
- KDXRider.net
- Posts: 14119
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: What is this thing?
Auburn flag? UGH
But seriously, good find, looks clean.
If you ever want to try MX, Crossbone MX is down in your area, Billingsley.
But seriously, good find, looks clean.
If you ever want to try MX, Crossbone MX is down in your area, Billingsley.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128