Dyna-Ring uh-oh!? UPDATED: Success!!!
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Dyna-Ring uh-oh!? UPDATED: Success!!!
Trying to install my E-series Dyna-Ring right now. Got everything apart, ditched the judder springs, and begin to reassemble the pack. For some reason the hub will not slide into the Dyna-Ring. I might be able to force it down but I don't think it would be a good idea.
Anyone else have this problem? Is there something I'm missing?
Anyone else have this problem? Is there something I'm missing?
Last edited by SS109 on 06:05 am Mar 06 2011, edited 1 time in total.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
No, my friction plates are fine. The center hub will not go into the Dyna-Ring. The opening in the Dyna appears to be too small of a diameter.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
>|QBB<[/url]
That is what I'm starting to think. The instructions are for the E-series but who knows! A couple of pics showing the problem. This shows as far as it will go without forcing it on the hub.rbates9 wrote:Maybe you got the H ring?
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
Suckage
Better you than me though
Better you than me though
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Yeah, I guess I'll be the one to help get the bugs sorted out. Yea, me.Mr. Wibbens wrote:Suckage
Better you than me though
I can tell you that I am totally freakin' bummed right now. I was going on a ride tomorrow with some buddies on some good trail that would be perfect to test it out on. Now, I guess I'll just have to reassemble and keep the stock clutch setup for now.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
I can imagine
I can relate though, I always have someting major go wrong right befor a big ride
Last year I had tranny problems right before a major ride and get together. I was working on the bike until the wee hours of the morning of the ride
I can relate though, I always have someting major go wrong right befor a big ride
Last year I had tranny problems right before a major ride and get together. I was working on the bike until the wee hours of the morning of the ride
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
-
- Member
- Posts: 44
- Joined: 05:59 pm Oct 30 2010
- Country:
- Location: Ca.
My hub was tight at first but the farther I pushed it in the easier it went. When the hub is completely in, the dyna ring is free, as if the hub has a taper to it. I was able to push it on by hand. My problem was the friction plates I have has a smaller inside diameter than the area on the new steel plates that has been machined. I compaired my friction plates to a stock one and the stock one has a larger ID that fits the machined area on the new steel plates. I have access to a machine shop, so I turned the ID of my friction plates to match the ID of the stock plate. I have no idea who manufactured my plates.
Klammer
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
I imagine the hub has more wear towards the center
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- KDX Butterfly
- Queen B
- Posts: 2063
- Joined: 05:12 am Aug 04 2007
- Country:
- Location: Cedar Grove, Tennessee
- KDX Butterfly
- Queen B
- Posts: 2063
- Joined: 05:12 am Aug 04 2007
- Country:
- Location: Cedar Grove, Tennessee
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
I already fired off an email with the above pics to him and I'll try to call them tomorrow.David_L6 wrote:I'd call Alan (Revloc) and ask him. I've talked to him a couple of times. Very nice guy.
There isn't anything to align where I'm having the problem. Look at the top pic. The only two parts I'm talking about is the shiny one on top (Dyna) and the one that looks like a gear (hub) that the Dyna is sitting on. The Dyna has a large open area that slides over the hub. The opening is completely smooth without any teeth whatsoever so it should just slide on. Sorry if the top pic is misleading as I have it sitting on top of the steels and friction plates that were removed.KDX Butterfly wrote:I (obviously) do not have any experience with the DynaRing, but would I be out of line in asking if everything is in complete alignment? (All plates are in place?)
Anyways, I just finished buttoning it back up for the night. I'll wait until I talk with Alan and see what he has to say.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
Do you have calipers?
Measure that beotch!
Measure that beotch!
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Yeah, but they are not here. All my real tools are being stored at a buddy's house in Tucson.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- KDX Butterfly
- Queen B
- Posts: 2063
- Joined: 05:12 am Aug 04 2007
- Country:
- Location: Cedar Grove, Tennessee