Shim Stack & Valve help

Got questions? We got answers....
Post Reply
curtisa
Member
Posts: 23
Joined: 11:54 am May 03 2010
Country:
Location: Redwood City, CA

Shim Stack & Valve help

Post by curtisa »

I've got the '95 KX 125 forks on my '03 KDX 200 and was hoping I could get some help on setting up a shim stack for a Sr. B hare scrambler in N. Calif. Also, instead of buying new gold valves, I've heard of guys modifying the OEM valve. I think the idea here is to open up the ports so there's more oil flow, which allows the shims to play a bigger role. If you're familar, have some pics or can help, please do.

The suspension isn't too bad as-is, but I'm a believer that better susepnsion means faster, safer and faster. By the way, I have an '08 KTM 250 XC, but I prefer riding this little 200. It's a great woods bike and a lot of fun to ride.
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

Although your forks are different, my KX450f forks were
intolerable for woods riding so I modified the shim stack by
removing 7 of the largest shims.
Very noticeable improvement as it took a lot of the harshness
out of the ride although I still may take a few more out when I
do the fork oil the next time.
I did do gold valves on my KDX and Race Tech does supply
shim charting based on your weight and riding style which
takes a good amount of the guess work out of the picture.

Here's a pic from the removed stack on the KX.


Image
curtisa
Member
Posts: 23
Joined: 11:54 am May 03 2010
Country:
Location: Redwood City, CA

Post by curtisa »

Big Help, thx
gregp
Member
Posts: 498
Joined: 03:44 pm Jul 30 2009
Country:

Post by gregp »

You will be very limited by the port edges on a stock piston. You will need to leave enough material for the shim stack to seal well. Also, stock suspension pistons are *very hard* and difficult to grind.
I have opened many pistons up, but it is hardly worth the effort because of the limitations of the stock dimensions.
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
curtisa
Member
Posts: 23
Joined: 11:54 am May 03 2010
Country:
Location: Redwood City, CA

Post by curtisa »

You're saying buy new valves? Or should I try a new stack first and see if I can get there?
gregp
Member
Posts: 498
Joined: 03:44 pm Jul 30 2009
Country:

Post by gregp »

I guess that I am saying it would be best to try re-valving, if you are still not satisfied, get some Race-Tech Gold valves, or some other after market pistons with larger compression ports.
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
gregp
Member
Posts: 498
Joined: 03:44 pm Jul 30 2009
Country:

Post by gregp »

I usually try to keep the overall height of the shim stack the same, so if you remove any shims, just move them to the top of the stack (directly under the thick washer).
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

>|<>QBB<
gregp wrote:I usually try to keep the overall height of the shim stack the same, so if you remove any shims, just move them to the top of the stack (directly under the thick washer).

Any reason why you try to keep the height the same ?
I have never seen any mention of the shim stack height,
just the positioning and quantity of different shims.
gregp
Member
Posts: 498
Joined: 03:44 pm Jul 30 2009
Country:

Post by gregp »

Yes, often times there is a bleed hole in the shaft that the piston mounts on. This hole lines up with a small hole on the inside of the piston bore. If you change the overall thickness of the shim stack, the holes will not line up correctly. You may also run out of threads on the post when tightening up the nut if you shorten the shim stack.
No sense in letting them flop around in my tool box, anyway.
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

Makes good sense.
I guess I have never taken out enough to lose
threads on the nut though.
I'll have to take a closer look next time I have em apart.
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

>|QBB<[/url]
TWMOODY wrote:Although your forks are different, my KX450f forks were
intolerable for woods riding so I modified the shim stack by
removing 7 of the largest shims.
Very noticeable improvement as it took a lot of the harshness
out of the ride although I still may take a few more out when I
do the fork oil the next time.
I did do gold valves on my KDX and Race Tech does supply
shim charting based on your weight and riding style which
takes a good amount of the guess work out of the picture.

Here's a pic from the removed stack on the KX.


Image
What year KX450?

Oh I see it's an 09

I just checked my 07's. I only have 10 of the larger shims

Some of the smaller ones were missing on one side

It's great finding more **** this guy fugged with :mad:
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

Wibb
Can't tell by the pic you posted on another thread but are
your fork tubes dark in color?
Not sure what else changed but in 09 KYB put a "DLC" (diamond like coating)
coating on the inner tubes to reduce stiction.
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

yes, mine are coated
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

whoever had these things was a real piece of work :wink:

I'm missing the 2 11 x .25's on one side and who knows what else
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

>|<>QBB<
Mr. Wibbens wrote:yes, mine are coated
You sure your forks are 07's ?
I didn't think they coated them till 09.
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

Dunno?

I just googled 07 KX450 and found a few pics with coated forks
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

http://www.bikez.com/motorcycles/kawasa ... f_2007.php

48mm inverted, Kayaba AOS with DLC coated sliders, 22-position compression and 20-position rebound dampening adjustment / 12.4 in.
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

Looks like 07 according to Bikez.com
Post Reply