KDX wheel on KX forks.
- ihatefalling
- Supporting Member
- Posts: 410
- Joined: 09:30 am Jul 20 2008
- Country:
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Well, someone send him an H model speedo drive and I'll send the E version and Ron can get it all sorted out.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
should just be able to measure them, I'd think
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
I don't know about anyone else but I like to have the part(s) in my hand so that I can measure them myself.
Ron, let me know if you would like me to send it your way!
Ron, let me know if you would like me to send it your way!
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- SS109
- KDXRider.net
- Posts: 5796
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
I'm not worried about it happening as I have already done the conversion and I'm happy with the KX wheel. Plus, I don't care to have the odometer. I have the part just laying around and figured I could help out Ron and my fellow KDX riders!
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
-
- Member
- Posts: 358
- Joined: 09:12 pm Nov 30 2009
- Country:
- Location: Singapore
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
I got the forks swaped around today. The brake line guids from the KDX even fit the KX forks! Right now I have the KX wheel on just to get it set up. Does any one have any thoughts on a guide for the Odo drive cable? I do not have the stock guide so I am starting from scratch. My thought is to get some sort of clamp to go around the fork tube with an ear to run the cable thru. But they might make something that would fit right on, Just haven't seen it yet.
I am sending my axle out to RB to get the bushing fitted and should have the spacers and other parts back to use the KDX wheel in a week or so.
I am sending my axle out to RB to get the bushing fitted and should have the spacers and other parts back to use the KDX wheel in a week or so.
-
- Member
- Posts: 358
- Joined: 09:12 pm Nov 30 2009
- Country:
- Location: Singapore
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
It cost me $5 to ship the axle to him, total cost would be $70 once returned back to me. I just looked on ebay and the wheels that I would need started at about $100 plus shipping. So I would say that there is a savings to use the wheel that you already own and spend some money on the axle mod. Also tracking down the correct wheel and spacers and axle to fit the forks that you are trying to use could be a challenge.
You get to keep your odometer drive with the axle mod too.
I already had a front wheel with the forks I used but the rim was cracked. To replace a rim and usually spokes is $150 or more and then you have to true it your self or pay even more to have it trued.
You get to keep your odometer drive with the axle mod too.
I already had a front wheel with the forks I used but the rim was cracked. To replace a rim and usually spokes is $150 or more and then you have to true it your self or pay even more to have it trued.
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
There might be a thread or two about it
Why not take a look around?
Why not take a look around?
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- scheckaet
- KDXRider.net
- Posts: 3740
- Joined: 12:09 am Nov 10 2005
- Country:
- Location: edmond oklahoma
he doesn't make them anymore, too much variation bike to bike.
02 KX 200 hybrid: RB head and carb
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156