Hi Guys how well would the bike run if the kips system was not working?
I recently removed the right side engine cover to replace the gear change shaft on my 220. When I removed the cover I noticed the advancer arm was broken off and I found it wedged in behind the kickstart mechanism.
I am assuming it has been like this since I bought the bike as I have not noticed any difference in power or power delivery since I have had the bike, the same goes for the noise. Having no KDX experience before I bought the bike I wouldn't know if it had the infamous KIPS rattle or not. I have ordered parts to fix. Is there anything else that I should check if this system has not been working and what sort of difference in power or power delivery will I notice when repaired.
Thanks Craig
KIPS not working?
-
- Member
- Posts: 4
- Joined: 05:11 am Jun 24 2010
- Country:
- Location: New Zealand
- Griffbones
- Supporting Member II
- Posts: 166
- Joined: 07:44 pm Jun 05 2010
- Country:
- Location: Red Oak, Iowa
- jlove1974
- Supporting Member
- Posts: 76
- Joined: 08:07 am Jun 15 2010
- Country: