1991 KDX 250 the cast part that holds the cable, in front of the actuator arm.
The squid I bought it from used clear silicone to hide it. I didn't see it because the bike was wet. Anyway, anybody got a fix for this?
I know I can use a screw and fender washer, I've seen some other bikes that actually had a manufactured part that bolts on the engine. Just wondering if it's been addressed here or if anyone has some personal experience with it. Thanks
Broken clutch actuator
-
- Member
- Posts: 12
- Joined: 06:24 am Apr 25 2010
- Country:
- Location: Mount Airy, NC
- Rick
- Platinum Member
- Posts: 914
- Joined: 09:24 pm Nov 10 2006
- Country:
- Location: Independence,KY
Mine was the same way, on the exact same bike.....silicone and all. I made a bracket that bolts on to the cylinder stud and bent it to hold pressure against the cable. Havent had a problem out of it.
Yes, they really do let me drive the Train!
1991 KDX 250 $Sold but not forgotten....
1996 Suzuki DR 350 $Sold!
2002 Honda CR 250 worth more than my house at this point........ :-)
2004 DR 650se Road Warrior
2002 DL1000 V-STROM
1991 KDX 250 $Sold but not forgotten....
1996 Suzuki DR 350 $Sold!
2002 Honda CR 250 worth more than my house at this point........ :-)
2004 DR 650se Road Warrior
2002 DL1000 V-STROM