1985 kdx200 stock needle?
-
- Member
- Posts: 7
- Joined: 01:44 pm Jan 31 2013
- Country:
1985 kdx200 stock needle?
I have one site that says it is a 6FL51 and another that says 5FJ57. My $100 bike came with both, Suggestions needed.
-
- Supporting Member
- Posts: 103
- Joined: 04:34 pm Mar 24 2016
- Country:
Re: 1985 kdx200 stock needle?
Im suggesting you sell that bike to me :) I can check my manual tomorrow to see if it says anything about that. Either way I'll let you know.
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1985 kdx200 stock needle?
If you are in the USA, then Partzilla shows it as:
6FL51-4, meaning clip position 4 is stock.
https://www.partzilla.com/product/kawas ... 62d7429bc2
6FL51-4, meaning clip position 4 is stock.
https://www.partzilla.com/product/kawas ... 62d7429bc2
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member I
- Posts: 156
- Joined: 11:29 pm May 26 2013
- Country:
1985 kdx200 stock needle?
And to add balance, if you're in Australia...
6FL52-4 :) out of the workshop manual.
6FL52-4 :) out of the workshop manual.
-
- Member
- Posts: 7
- Joined: 01:44 pm Jan 31 2013
- Country:
1985 kdx200 stock needle?
running the 5FJ57 needle in middle clip. probably a little lean, too cold to ride a lot.