Hello all, it’s been a while since I’ve posted.
I’m overhauling one of my sons ‘99 220... he took out a couple of gears. I’ve got access to a late model 200 complete gear set. The question is are the 200 and the 220s interchangeable as in ratios? Thanks Bryan
200/220 transmission gear compatibility
-
- Member
- Posts: 7
- Joined: 12:22 pm Mar 13 2012
- Country:
-
- Supporting Member II
- Posts: 925
- Joined: 10:00 am Jan 04 2014
- Country:
Re: 200/220 transmission gear compatibility
it's the same bike all around, except for the cylinder and carb.
yes, you can swap the transmission parts.
yes, you can swap the transmission parts.
-
- Member
- Posts: 129
- Joined: 10:02 am Mar 08 2014
- Country:
Re: 200/220 transmission gear compatibility
Gears are the same as wel as the entire bottom-end
-
- Member
- Posts: 7
- Joined: 12:22 pm Mar 13 2012
- Country:
200/220 transmission gear compatibility
Thanks guys! Much appreciated!
-
- Member
- Posts: 284
- Joined: 04:17 am Nov 29 2009
- Country:
- Location: Colorado Springs, CO, USA
Re: 200/220 transmission gear compatibility
A few (well, at least one) of the power valve parts are different, too. (To account for the larger bore of the 220.)ohgood wrote:it's the same bike all around, except for the cylinder and carb.
- bufftester
- Platinum Member
- Posts: 3462
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: 200/220 transmission gear compatibility
Yes, the center KIPS valve (the large one) is different between the two (12005-1274 for the 200, 12005-1273 for the 220) but the rest of the KIPS parts are the same.
-
- Member
- Posts: 129
- Joined: 10:02 am Mar 08 2014
- Country:
Re: 200/220 transmission gear compatibility
The chain is different and so are the swingarm stickers.