New Kickstarter Setup
-
- Member
- Posts: 19
- Joined: 09:47 pm Sep 11 2017
- Country: USA
New Kickstarter Setup
So I was informed that I could remove the stock KDX220R 2002 boss lever/knuckle from the splines, and replace it with a KX250 bosslever/knuckle. Then after that, I would set up the rest of the kick start lever mechanism with the KX125 parts. I don't know all of the exact parts I need for that swap, so if anyone can go to Rocky Mountain ATV/MC and look at all of the parts diagrams and tell me, it would be greatly appreciated. Thanks everyone!!!
- Tyl3r
- Platinum Member
- Posts: 1336
- Joined: 06:51 pm Nov 26 2012
- Country: USA
- Location: SW Pennsylvania
Re: New Kickstarter Setup
You don't need to keep making new threads for the same topic, could have just posted this reply in the thread from yesterday.
If you read through this thread, it explicitly states the part numbers needed to do the kick starter arm swap: https://thumpertalk.com/forums/topic/85 ... er-how-to/
If you read through this thread, it explicitly states the part numbers needed to do the kick starter arm swap: https://thumpertalk.com/forums/topic/85 ... er-how-to/
05 KX220 Hybrid all decked out
-
- Member
- Posts: 743
- Joined: 06:37 am Nov 22 2009
- Country:
- Location: united kingdom
New Kickstarter Setup
92-98 kx 125 kickstart....
1999-2001 kx 250 knuckle/boss
1999-2001 kx 250 knuckle/boss
-
- Gold Member
- Posts: 877
- Joined: 06:59 am Jan 27 2017
- Country: US
- Location: Florida
Re: New Kickstarter Setup
Another alternative but needs to start with a good, or new KDX boss. Look down about 1/2 way through this post. I used my stock KDX boss and the lever from an 84-89 KX125. Its a direct swap lever to lever.
http://www.kdxrider.net/forums/viewtopi ... 13&t=21872
http://www.kdxrider.net/forums/viewtopi ... 13&t=21872
- JoKDX220r
- Gold Member
- Posts: 201
- Joined: 04:04 pm Oct 03 2008
- Country:
Re: New Kickstarter Setup
same post from slick_nick but on this forumTyl3r wrote:You don't need to keep making new threads for the same topic, could have just posted this reply in the thread from yesterday.
If you read through this thread, it explicitly states the part numbers needed to do the kick starter arm swap: https://thumpertalk.com/forums/topic/85 ... er-how-to/
http://www.kdxrider.net/forums/viewtopi ... 77&t=10228