How to reinstall clutch?
-
- Supporting Member
- Posts: 103
- Joined: 04:34 pm Mar 24 2016
- Country:
How to reinstall clutch?
So I had my clutch off for a repair. on my 1985 kdx 200 How tight should I tighten my clutch springs? Do Io just make them snug? Tighten them down all the way so that they are compressed? How do I tighten them?
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: How to reinstall clutch?
torque wrench to what the manual says
It's just a few inch - pounds
It's just a few inch - pounds
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 284
- Joined: 04:17 am Nov 29 2009
- Country:
- Location: Colorado Springs, CO, USA
How to reinstall clutch?
Yes, tighten them down all the way. (Tighten them fairly evenly. Don't tighten one all the way while the others are loose.) As Jason said, use the torque spec. in the manual.mwoj wrote:Tighten them down all the way...
-
- Gold Member
- Posts: 821
- Joined: 10:00 am May 29 2012
- Country:
- Location: Spring Grove, Illinois
How to reinstall clutch?
For H Series, Manual says: Clutch Spring Bolts: 78 in-lb
Clutch Hub Nut: 65 ft-lb
I would expect your earlier version would use similar torque values.
Clutch Hub Nut: 65 ft-lb
I would expect your earlier version would use similar torque values.
-
- Supporting Member
- Posts: 103
- Joined: 04:34 pm Mar 24 2016
- Country:
How to reinstall clutch?
If I tighten to the 7-8 pounds, the springs just compress. The bolt keep on going down.
-
- Member
- Posts: 15
- Joined: 06:56 am May 23 2016
- Country:
Re: How to reinstall clutch?
Yes, they will keep going. The bolts will bottom out before they torque.
Sent from my SM-G920P using Tapatalk
Sent from my SM-G920P using Tapatalk