1983-1985 KDX200 piston kits
-
- Supporting Member
- Posts: 10
- Joined: 01:28 pm Feb 23 2012
- Country:
1983-1985 KDX200 piston kits
I Have literally the only Piston kits on the planet for 1983-1985 KDX200!!! Piston, rings, pin and circlip. they are on Ebay!! I will have more made when these sell out. German made, kick A$$ quality!!!
-
- Member
- Posts: 2
- Joined: 05:04 pm Dec 16 2012
- Country:
1983-1985 KDX200 piston kits
do you still have any of these still available?
-
- Supporting Member
- Posts: 10
- Joined: 01:28 pm Feb 23 2012
- Country:
Re: 1983-1985 KDX200 piston kits
Hi there, I am currently sold out and was planning to restock toward spring, unless you know you need one earlier!!
-
- Member
- Posts: 2
- Joined: 05:04 pm Dec 16 2012
- Country:
Re: 1983-1985 KDX200 piston kits
email me at drinkies@hotmail.com when you get some in thanks
-
- Supporting Member
- Posts: 10
- Joined: 01:28 pm Feb 23 2012
- Country:
Re: 1983-1985 KDX200 piston kits
No Problemoo, I think they are due in early March...takes a little while!! I just picked up a 1984 KDX200 in a box...and I have another Box bike, probably make something cool outta these!!
- KDXGarage
- KDXRider.net
- Posts: 14071
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1983-1985 KDX200 piston kits
Wiseco will make a run of 10
edit on 02-03-15: Wiseco requires a run of 12
edit on 02-03-15: Wiseco requires a run of 12
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 2
- Joined: 02:13 pm Jan 18 2013
- Country:
Re: 1983-1985 KDX200 piston kits
Let me know when there ready im up for an orderRunningman wrote:No Problemoo, I think they are due in early March...takes a little while!! I just picked up a 1984 KDX200 in a box...and I have another Box bike, probably make something cool outta these!!
-
- Member
- Posts: 11
- Joined: 05:13 pm Mar 20 2010
- Country:
- Location: Warner Robins, GA
Re: 1983-1985 KDX200 piston kits
I would be interested in a kit also
- KDXGarage
- KDXRider.net
- Posts: 14071
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
1983-1985 KDX200 piston kits
Although my comments were from "something I got off the internet", it actually was from Thumpertalk forum member "Wiseco" who works(ed) there.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 1
- Joined: 03:37 am Apr 17 2013
- Country:
Re: 1983-1985 KDX200 piston kits
Hey Runningman...
Do ya have a piston kit for an '83 KDX200? There are other parts I'm after too, but the top end needs an overhaul pretty bad. I'd really like to find a new motor assembly, because the oil drain plug was tightened enough to break the case. Let me know?!
Thanks!!
Do ya have a piston kit for an '83 KDX200? There are other parts I'm after too, but the top end needs an overhaul pretty bad. I'd really like to find a new motor assembly, because the oil drain plug was tightened enough to break the case. Let me know?!
Thanks!!
-
- Supporting Member
- Posts: 10
- Joined: 01:28 pm Feb 23 2012
- Country:
Re: 1983-1985 KDX200 piston kits
Hi there folks! I am just getting physically back online...I had a pretty serious relapse of the "big C" and it took a while to get back to being a survivor! Anyways, the Wossner pistons are on the way, 6 weeks max! And I actually have a complete 84 motor if you are still looking!
-
- Member
- Posts: 25
- Joined: 10:58 pm Jan 23 2013
- Country:
1983-1985 KDX200 piston kits
Glad to hear that you are a survivor! I am interested in a piston kit for my 84 kdx200 or the 84 engine you mentioned.
-
- Member
- Posts: 120
- Joined: 11:08 am Nov 27 2012
- Country:
Re: 1983-1985 KDX200 piston kits
I just put a Wiseco in my 83 kdx200.i orderd a piston kit from a late model. Had to grind alittle on the bottom to clear. It had a Wiseco and I just ground down till it matched the original and then made sure it cleared the cases and its good to go.
Sent from the back woods of vt via patchy Internet
Live free and ride hard
Sent from the back woods of vt via patchy Internet
Live free and ride hard
-
- Member
- Posts: 1
- Joined: 02:59 pm Feb 02 2015
- Country:
Re: 1983-1985 KDX200 piston kits
I own a 1983 KDX 200 and am in need of a top end. Do you have availability or a source for Pistons and rings? First time posting, any advice or info appreciated. I was told a 1995 KDX piston would work, is that true? It is approximately 3 mm shorter from the piston pin to the top of the head.Shove11 wrote:Hey Runningman...
Do ya have a piston kit for an '83 KDX200? There are other parts I'm after too, but the top end needs an overhaul pretty bad. I'd really like to find a new motor assembly, because the oil drain plug was tightened enough to break the case. Let me know?!
Thanks!!
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Re: 1983-1985 KDX200 piston kits
Try calling The Wheel Master 9-5 Mon-Thurs (Pacific Time). He's a weisco authorized dealer and stocks many KDX pistons. Phone # is 253-927-0271Rider6602 wrote: I own a 1983 KDX 200 and am in need of a top end. Do you have availability or a source for Pistons and rings? First time posting, any advice or info appreciated. I was told a 1995 KDX piston would work, is that true? It is approximately 3 mm shorter from the piston pin to the top of the head.
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.
-
- Member
- Posts: 59
- Joined: 10:18 pm Sep 26 2014
- Country:
Re: 1983-1985 KDX200 piston kits
Sorry to revive an old thread. Anyone got one of these?
-
- Member
- Posts: 3
- Joined: 02:11 pm Jul 13 2016
- Country:
1983-1985 KDX200 piston kits
I need a 1983-1985 KDX200 piston kit for my 1985 KDX200, can anyone help??
-
- Member
- Posts: 1
- Joined: 01:15 pm Sep 10 2016
- Country: United States
1983-1985 KDX200 piston kits
I just got an 83 engine for my 88 frame had a little modification to get it in but the top end will need work at some point let me know when you get another order in
-
- Member
- Posts: 3
- Joined: 11:10 am Mar 31 2017
- Country: US
1983-1985 KDX200 piston kits
FYI, I contacted the guy recommended in this thread "Wheel Master, a weisco authorized dealer and stocks many KDX pistons. Phone # is 253-927-0271" yesterday and spoke with owner Morrie. A pleasure to speak with someone as knowledgeable as he is. For my 1985 KDX200, he confirmed there are no availble OEM piston/rings, there are no substitutes, and the viable options are: (1) sleeve cylinder & bore/hone to accommodate use of an over-bore Wisco piston kit {he stocls kits & can perform mods} and (2) plate cylinder/mod to use available piston kit.
I'd recommend anyone seriously interested in keeping their vintage bike alive to contact him and hear first hand what can be done. I'm planning to ship my cylinder to him, let him evaluate & recommend best option. Simply sharing as I go along.
I'd recommend anyone seriously interested in keeping their vintage bike alive to contact him and hear first hand what can be done. I'm planning to ship my cylinder to him, let him evaluate & recommend best option. Simply sharing as I go along.
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Re: 1983-1985 KDX200 piston kits
I know Morrie and his Son Jim. Great guys. Morrie does great engine work and has been in the business for many years. Jim has built all my wheels and if you ever need a wheel built, he is the go to guy. I've never had a problem with a wheel that he has worked on after he worked his magic.
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.