Shift shaft replacement
-
- Member
- Posts: 4
- Joined: 06:20 pm Oct 29 2014
- Country:
Shift shaft replacement
I have a 2005 kdx200 that needs the shaft replaced. What can I use to hold the flywheel while I remove the clutch basket? Thanks in advance.
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: Shift shaft replacement
This is how I usually do it, any type of aluminum, copper or soft metal between the gears. You can also lockup the rear tire with the bike in 5th or 6th gear.
-
- Member
- Posts: 26
- Joined: 10:27 am Mar 05 2014
- Country:
- Location: Bryant, AR
Re: Shift shaft replacement
I do it like Ted; I use a piece of 1/4" copper tubing with the end crushed to fit like Ted's picture.
Ken Powell
2012 KTM 300 XC with YZ SSS cartridges in the WP tubes
2003 YZ265WR with 2005 AOSS forks
2003 KX125 / KDX200 motor with YZ SSS forks
First Motorcycle - 1963 Harley 175 Scat
2012 KTM 300 XC with YZ SSS cartridges in the WP tubes
2003 YZ265WR with 2005 AOSS forks
2003 KX125 / KDX200 motor with YZ SSS forks
First Motorcycle - 1963 Harley 175 Scat
-
- Member
- Posts: 4
- Joined: 06:20 pm Oct 29 2014
- Country:
Re: Shift shaft replacement
So gentlemen i did not need to remove the flywheel cover? Thank you. Now, what size is the nut for the clutch basket 22mm 23mm?
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: Shift shaft replacement
Nope.
And I'm 99% sure it is a 22mm
And I'm 99% sure it is a 22mm
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Shift shaft replacement
I am not sure on a 1995 - 2006, but 1987 is 24mm.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 4
- Joined: 06:20 pm Oct 29 2014
- Country:
Re: Shift shaft replacement
All right,All right. Got some copper tubing. Going to get some new deep well sockets and spend the afternoon getting my sons bike fixed. Thank you Gentlemen.