2002 KDX200 to DRZ400 Fork - NEED ADVICE
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
I need all the advice I can get here.
I have a 2002 KDX 200.
My friend had a really nice 2006 Suzuki DRZ400 Triple Tree and Forks for $100.00 (I believe forks are SHOWA 49mm)
I am new to dirt bikes so I am not sure how hard this will be but I really would like to make it happen.
I have a 2002 KDX 200.
My friend had a really nice 2006 Suzuki DRZ400 Triple Tree and Forks for $100.00 (I believe forks are SHOWA 49mm)
I am new to dirt bikes so I am not sure how hard this will be but I really would like to make it happen.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
Not sure if anyone has ever done DRZ, but it shouldn't be too bad. You'll probably need the front wheel as well, and possibly brake caliper. Check around this section a bit to get an idea of what's involved.
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
I know I will need to switch the Steering Stems.
The KDX front brake calipers are the same.
The axles are different.
The KDX rotor is too small.
The KDX front brake calipers are the same.
The axles are different.
The KDX rotor is too small.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
Sounds like you know what you need. It's not a lot of work to swap the front end, after getting the steering stem swapped over.
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
I am struggling to find a Front Wheel from a 2006 DRZ400.
Ebay does not have them. Any other wheels that would work with the DRZ400 Forks and Axle
Ebay does not have them. Any other wheels that would work with the DRZ400 Forks and Axle
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
Does anyone know if the STEMS are Threaded into the bottom Triple Tree or are they just Pressed on.
- CoronasAndChips
- Supporting Member I
- Posts: 227
- Joined: 12:55 pm May 18 2012
- Country:
- Location: Kalkaska, Mi
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
pressed
Elbow grease contains no trans fat!
CoronasAndChips on XBox Live
BFBC2, BF3, COD 2,3,4, Black Ops, Red Dead Redemption, Tiger Woods 08' and 09' and Forza 2..... mostly
CoronasAndChips on XBox Live
BFBC2, BF3, COD 2,3,4, Black Ops, Red Dead Redemption, Tiger Woods 08' and 09' and Forza 2..... mostly
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
Does anyone know how I can figure out what other Suzuki years and models Wheel fits my 2006 DRZ400 FORKS and AXLE.
I am having hard time finding a Front wheel
I am having hard time finding a Front wheel
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
same way you check comparability between kawasaki bikes
http://www.rockymountainatvmc.com/oem-schematic/2
here is your front wheel, now start changing years/models to see which part numbers match and what you can find :)
http://www.rockymountainatvmc.com/oem-schematic/2
here is your front wheel, now start changing years/models to see which part numbers match and what you can find :)
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
-
- Member
- Posts: 352
- Joined: 01:33 pm Jan 22 2011
- Country:
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
Front wheel should be identical to the 96-98 rm125/250, you know, where the forks were originally on
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
FactoryX, are you saying the Front Wheel of the 96-98 RM125 will fit my Forks that are from a 2006 DRZ400
-
- Member
- Posts: 352
- Joined: 01:33 pm Jan 22 2011
- Country:
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
They're both the same fork with different valving, I give it a 50/50 chance of fitting, other than that I haven't a clue. Sorry I couldn't help any further.
-
- Member
- Posts: 8
- Joined: 12:46 am Apr 22 2013
- Country:
2002 KDX200 to DRZ400 Fork - NEED ADVICE
I found out the RM 125 or 250 21" Front Wheel will fit.
Now I have to figure out if the Brake Rotor will work.
RM 125 and 250 have 250mm Diameter Rotor.
I think I need a 310mm
Now I have to figure out if the Brake Rotor will work.
RM 125 and 250 have 250mm Diameter Rotor.
I think I need a 310mm
- dude541
- Supporting Member I
- Posts: 300
- Joined: 03:25 pm May 04 2012
- Country:
- Location: kidderminster,worcestershire. UK
2002 KDX200 to DRZ400 Fork - NEED ADVICE
if you need a 310mm disc the forks you got must be of the drz400sm (supermoto)??goruthless wrote:I found out the RM 125 or 250 21" Front Wheel will fit.
Now I have to figure out if the Brake Rotor will work.
RM 125 and 250 have 250mm Diameter Rotor.
I think I need a 310mm
as the standard bike uses a 250mm rotor.
best regards
john
- gsa102
- Supporting Member II
- Posts: 453
- Joined: 12:33 pm Aug 16 2011
- Country:
- Location: PA
Re: 2002 KDX200 to DRZ400 Fork - NEED ADVICE
I did the swap, It is posted on here (on the next page). I used a YZ/WR450F front wheel and spacers, and could use the stock KDX front brakes with the YZ/WR rotor. Just had to shim the DRZ axle with a couple washers. Love them, sprung about right for my 240 lb frame. If you are lighter, you may have to use lighter fork springs. I also use a Titanium 5.5 shock spring from a YZ 250F.
http://kdxrider.net/forums/viewtopic.php?f=104&t=11259
http://kdxrider.net/forums/viewtopic.php?f=104&t=11259
This is my rifle, this is my gun, the YZ to go fast, the KDX is for fun!
96 KDX 200, 09 YZ 250
96 KDX 200, 09 YZ 250