Pro Circuit silencer (E-series)
-
- Member
- Posts: 643
- Joined: 09:05 pm Sep 07 2010
- Country:
- Location: Houston, TX
Pro Circuit silencer (E-series)
scored a factory sound PC silencer on ebay with 5 min of run time for cheap, you could say it's brand new. I took off the old junky FMF and installed this, but noticed that the first bolt hole on the silencer doesn't come close to the mounting hole on the frame. The 2nd bolt hole fits perfect with the muffler hanger thing and feels pretty solid with just that one bolt holding it up and the rubber connection to the header pipe. Anyone else run into this problem? I know that it should be fine, but it's little things like this that still concern me
-
- Platinum Member
- Posts: 644
- Joined: 07:46 am Nov 09 2009
- Country:
Re: Pro Circuit silencer (E-series)
The stock E series silencer uses a little aluminum bracket to connect the second silencer bolt hole to the frame. The FMF may not have had that setup, but the PC might. Just fab up a little bracket out of scrap if you don't have the stocker.
David Eckel
- KDXGarage
- KDXRider.net
- Posts: 14068
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Pro Circuit silencer (E-series)
You can kind of see it on mine.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 643
- Joined: 09:05 pm Sep 07 2010
- Country:
- Location: Houston, TX
Re: Pro Circuit silencer (E-series)
that's the bracket "muffler hanger" I was talking about, the second bolt hole lines up perfect with the bracket but the 1st hole is off-centered. nice bike btw
- KDXGarage
- KDXRider.net
- Posts: 14068
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Pro Circuit silencer (E-series)
Thanks!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128