idle adjustment screw vs air screw
-
- Member
- Posts: 50
- Joined: 04:45 am Feb 01 2012
- Country:
idle adjustment screw vs air screw
Can someone please explain the virtues of the idle adjustment screw, and how to properly adjust it? I am all square on setting the air screw, but where does the idle adjustment screw fit in getting the bike running properly. Thanks in advance.
-
- Supporting Member III
- Posts: 1484
- Joined: 02:26 pm Jun 29 2005
- Country:
- Location: Alabama
idle adjustment screw vs air screw
The idle adjustment screw sets how low the slide will fall in the bore of the carb.
You may have to go back and forth a bit from air screw to idle speed screw to get a good idle, but the idle screw should not be used to compensate for a bad pilot jet choice
Sometimes the end that contacts the slide gets all buggered up.
You may have to go back and forth a bit from air screw to idle speed screw to get a good idle, but the idle screw should not be used to compensate for a bad pilot jet choice
Sometimes the end that contacts the slide gets all buggered up.
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy