1984 KDX200 Questions

Got questions? We got answers....
Post Reply
casper
Member
Posts: 4
Joined: 03:49 am Jan 10 2017
Country: South Africa

1984 KDX200 Questions

Post by casper »

Hi guys

This is my first post. i have a few questions that I hope you guys can help me.

I am from South Africa. I got my hands on a '84 KDX200 (VIN: DX200B-000849) but the motor was completely rusted, as it was filled to the head with water.
Image

Image

Then, I got an extra motor, this one, with a BAD crank, bad bearings, and some broken brackets and casings. So, I took the two motors, stripped them, and build one motor out of the best parts from both engines. I installed new bearings, seals, and the rest is all new.

Image

Image

Image

Image

Now, my problem is, it cannot start. Wel, it can, if you pull it behind a car. Also, if I kick it about a thousand times, it will start for about 5 seconds, then die.

So, i saw i need a new intake manifold. Myne is perished badly and even cracked. I have cleaned the carb to perfection, set the float levels and all.

My question is, which versions (and year models) intake wil work here?

Image
Image
Image
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 KDX200 Questions

Post by KDXGarage »

Welcome to the forums. You may want to check the parts diagrams online. A fair amount of 1983, 1984 ad's 1985 parts are the same.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply