SR frame layout

Discussion specific to KDX models not sold in the USA
Post Reply
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

SR frame layout

Post by pumpguy »

Is there an easy way to see how the SR models were configured, especially how the oil tank was mounted and piped?

My H model frame has an unused bracket on the left (shift lever) side that I assume was for mounting an oil tank on the SR models.

I tried using the links listed above, but seem to be having a problem with navigation.

Thanks
Last edited by pumpguy on 01:47 pm Jun 30 2017, edited 1 time in total.
bertos883
Member
Posts: 13
Joined: 03:31 am May 14 2016
Country:

Re: SR frame layout

Post by bertos883 »

when you say H model, what year bike are you talking about? I have a '01 200J (which as far as I can tell is the aussie H) that had a curious tag on the left side of the subframe, referenced in this post. determined that it was for mounting the plastic shroud that the numberplate and indicators were mounted to from the factory.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »

https://blogs.yahoo.co.jp/wbkjy252/32834314.html

http://www.ablett.jp/bikes/kdx/kdx_j.htm

http://nossi.exblog.jp/25152329/

Look for KDX220SR. There was no "SR" 200 that looked like an "H". Last ones were "E" style and then the KDX250SR also.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
cornishwrecker220
Member
Posts: 743
Joined: 06:37 am Nov 22 2009
Country:
Location: united kingdom

SR frame layout

Post by cornishwrecker220 »

Jason I believe Kawasaki did make a H model 200SR ....the motor was a full blown version & came with plastic fuel tank & 35mm carb ....it also ran on pre mix & was not oil injection .

I never knew Kawasaki made this model until a previous member from OZ posted his pics .... I think this model H series was called kdx200 J .
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »



ASB EST I CAN TELL... :hmm:

I don't think a "J" is an SR. 1997 KDX200-J1 was the start. No rear tag holder or mirrors. KDX220-B does. (1994 - 1999)

Last KDX250 (world, not USA) was 1995 KDX250-D5. Looks like last KDX250 "SR" was 1994 KDX250-F4. There was also an "E" KDX250.

A and B for KDX125
A, B, C, D, E, F and G for KDX200
A and B for KDX220R
D, E and F for KDX250
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
cornishwrecker220
Member
Posts: 743
Joined: 06:37 am Nov 22 2009
Country:
Location: united kingdom

SR frame layout

Post by cornishwrecker220 »

What about "darkfibers" H series kdx 200 on Christmas Island ?
His has the pillion pegs & larger flywheel but also the kick stand is mounted to the frame & not swingarm & it also appears to have the 35mm carb but no oil tank or pump ? :hmm:
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »

J model""
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
cornishwrecker220
Member
Posts: 743
Joined: 06:37 am Nov 22 2009
Country:
Location: united kingdom

SR frame layout

Post by cornishwrecker220 »

So do you think Kawasaki make the J model before or after the SR version or Perhaps it's made up of leftovers from the parts bin when Kawasaki discontinued the kdx ?
Until I saw the pics of darkfibers kdx I never knew this model of kdx even existed .
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »

I can only guess that certain markets call for certain styles of bikes.

SR versions were around before a "J".
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

Re: SR frame layout

Post by pumpguy »

bertos883 wrote:when you say H model, what year bike are you talking about? I have a '01 200J (which as far as I can tell is the aussie H) that had a curious tag on the left side of the subframe, referenced in this post. determined that it was for mounting the plastic shroud that the numberplate and indicators were mounted to from the factory.
Whatever non-USA model that used the same perimeter frame as the 1995 & later KDX H series 200 and 220 bikes. I am assuming this would be an SR model, but I don't know that much about the non-USA models.

My frame has 2 unused fittings. On the brake side there is a C shaped piece that would be for attaching a mechanical stop light switch. On the shift lever side in the same area is a rectangular tab with a hole drilled through. I would like to see what would have been attached to it, and how.

Also, there appears to be a problem with the URL you posted. I can't get anything to come up.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »

Link worked for me
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

Re: SR frame layout

Post by pumpguy »

Jason wrote:Link worked for me

Sorry, my error. I meant the youtube link posted above.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: SR frame layout

Post by KDXGarage »

oh, my bad
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

SR frame layout

Post by pumpguy »

Can anyone else provide a link or contact info to show what was attached to the frame tab I described in my first post?

I seem to remember a drawing showing how the SR oil tank was mounted to the frame, but can't find it now.

I can't get anything to come up from the youtube link posted earlier.

Thanks.
Post Reply