Hi guys, I have a 1990 kdx200sr that desperately needs a new set of kips valves. I have read conflicting info as to whether E series kips valves fit into an sr. I have emailed bkd but no response as of yet. I have a race day coming up soon and would like to order some valves asap as I am in Australia so I thought I'd ask on here while I wait for James to get back to me.
Does anyone know if E series valves fit an sr with little to no modification?
Thanks in advance
Ben
E series kips valves in Sr model
-
Bej
- Member
- Posts: 4
- Joined: 03:35 am Sep 06 2020
- Country: Australia
- Location: Qld Australia
E series kips valves in Sr model
- Attachments
-
- 20240322_193337.jpg (2.77 MiB) Viewed 364 times
-
- 20240322_195000.jpg (3.68 MiB) Viewed 364 times
-
- 20240322_194835.jpg (3.75 MiB) Viewed 364 times
-
Hooters
- Member
- Posts: 20
- Joined: 05:41 am Nov 27 2018
- Country: Australia
Re: E series kips valves in Sr model
Hi Ben
I have used the BKD valves in my 1990 SR with no issues. I am also in Aus.
I have used the BKD valves in my 1990 SR with no issues. I am also in Aus.
-
Bej
- Member
- Posts: 4
- Joined: 03:35 am Sep 06 2020
- Country: Australia
- Location: Qld Australia
Re: E series kips valves in Sr model
Hi Hooters,
Thanks for the reply. I ended up buying an E series cylinder so I can run an fmf pipe with the spring style attachments rather than the bolt on type. It should be back from the platers tomorrow and I'll bolt it to the sr bottom end over the weekend.
Cheers
Thanks for the reply. I ended up buying an E series cylinder so I can run an fmf pipe with the spring style attachments rather than the bolt on type. It should be back from the platers tomorrow and I'll bolt it to the sr bottom end over the weekend.
Cheers