2001 KDX200 stator questions

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
Buck Nasty
Member
Posts: 25
Joined: 11:10 pm Oct 02 2017
Country: US

2001 KDX200 stator questions

Post by Buck Nasty »

1. What is the OEM stator watt output on these things? Curious for headlight/tail light upgrades.

2. If you were to delete lighting all together, would it harm the stator? I know that tends to be the case on my DRZ. If you can't discharge enough electricity, the stator can burn up.

Sent from my SM-G965U using Tapatalk
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 2001 KDX200 stator questions

Post by KDXGarage »

About 40, RPM based
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: 2001 KDX200 stator questions

Post by bufftester »

About 40 as Jason said, and no, eliminating the lighting wont burn up the stator. I haven't run lighting on my 220 for years and not a single stator problem, and I even rewound mine for higher output around 70W (intending to use lighting but haven't gotten around to it).

Rewinding for more output is very simple and documented on this sight. Stock stator works fine with LED lighting as well. (you will get some flicker since the output is AC
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 2001 KDX200 stator questions

Post by KDXGarage »

I don't know what your end goal is, but here is one commercially available option.

http://www.rickystator.com/product/stat ... coil-89-on

It says KDX220R, but it is for 1989 and newer KDX200 / KDX220R / KDX250.

If any on an "A" or "C" is reading, they have options for those as well.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Buck Nasty
Member
Posts: 25
Joined: 11:10 pm Oct 02 2017
Country: US

Re: 2001 KDX200 stator questions

Post by Buck Nasty »

Thanks guys!

Sent from my SM-G965U using Tapatalk
ohgood
Supporting Member II
Supporting Member II
Posts: 925
Joined: 10:00 am Jan 04 2014
Country:

2001 KDX200 stator questions

Post by ohgood »

Buck Nasty wrote:1. What is the OEM stator watt output on these things? Curious for headlight/tail light upgrades.

2. If you were to delete lighting all together, would it harm the stator? I know that tends to be the case on my DRZ. If you can't discharge enough electricity, the stator can burn up.

Sent from my SM-G965U using Tapatalk

the drz stator is a doozy.... not enough (cool!) oil flowing over it, not enough output, not enough insulation, etc ...

the kdx lighting coil is super easy to upgrade, just rewind it at home in an hour or two. it doesn't care if you toss lights or not.
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 2001 KDX200 stator questions

Post by Julien D »

So you have 2 coils in your KDX, one for the ignition and one for the lighting. You could remove the lighting coil altogether and the ignition coil will still function.
Image
Post Reply