Page 1 of 1

200/220 transmission gear compatibility

Posted: 08:59 am Oct 17 2017
by Cobry
Hello all, it’s been a while since I’ve posted.
I’m overhauling one of my sons ‘99 220... he took out a couple of gears. I’ve got access to a late model 200 complete gear set. The question is are the 200 and the 220s interchangeable as in ratios? Thanks Bryan

Re: 200/220 transmission gear compatibility

Posted: 09:29 am Oct 17 2017
by ohgood
it's the same bike all around, except for the cylinder and carb.

yes, you can swap the transmission parts.

Re: 200/220 transmission gear compatibility

Posted: 10:20 am Oct 17 2017
by Timtee
Gears are the same as wel as the entire bottom-end

200/220 transmission gear compatibility

Posted: 11:38 am Oct 17 2017
by Cobry
Thanks guys! Much appreciated!

Re: 200/220 transmission gear compatibility

Posted: 06:57 pm Oct 18 2017
by Jim B
ohgood wrote:it's the same bike all around, except for the cylinder and carb.
A few (well, at least one) of the power valve parts are different, too. (To account for the larger bore of the 220.)

Re: 200/220 transmission gear compatibility

Posted: 10:15 pm Oct 18 2017
by bufftester
Yes, the center KIPS valve (the large one) is different between the two (12005-1274 for the 200, 12005-1273 for the 220) but the rest of the KIPS parts are the same.

Re: 200/220 transmission gear compatibility

Posted: 06:27 am Oct 19 2017
by Timtee
The chain is different and so are the swingarm stickers.