KDX 200 Clutch Spring Direction

This area is for KDX 200 H series part numbers etc...

KDX 200 Clutch Spring Direction

Postby bergilong » 11:56 am Oct 07 2017

So, I'm replacing my KDX200 clutch with a Tusk one. I'm putting it back together and can't find out which direction this large, ring shaped spring goes. Part 92144-1522 . I'm not home right now to take a picture, but here's a picture of it that I found on google:Image
bergilong
Member
 
Posts: 31
Joined: 12:59 pm Aug 13 2016
Location: Arkansas
Has thanked: 3 times
Been thanked: 0 time

Re: KDX 200 Clutch Spring Direction

Postby Timtee » 06:18 pm Oct 07 2017

You can run it without the judder springs.
Timtee
Member
 
Posts: 67
Joined: 10:02 am Mar 08 2014
Has thanked: 0 time
Been thanked: 3 times

KDX 200 Clutch Spring Direction

Postby Dekon » 07:16 pm Oct 08 2017

I put mine with the large side facing in on the plates and the thin side against the clutch hub. But like Timtee, you do not have to run it. When I got my '89, it didn't have it and the clutch worked fine. Being OCD, when I replaced my clutch I put one in.
Dekon
Supporting Member II
Supporting Member II
 
Posts: 661
Joined: 07:54 am Jun 26 2012
Location: Rhode Island
Has thanked: 6 times
Been thanked: 19 times


Return to KDX 200 H series

Who is online

Users browsing this forum: No registered users and 2 guests