KDX 200 Clutch Spring Direction

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
bergilong
Member
Posts: 42
Joined: 12:59 pm Aug 13 2016
Country: USA
Location: Arkansas

KDX 200 Clutch Spring Direction

Post by bergilong »

So, I'm replacing my KDX200 clutch with a Tusk one. I'm putting it back together and can't find out which direction this large, ring shaped spring goes. Part 92144-1522 . I'm not home right now to take a picture, but here's a picture of it that I found on google:Image
Timtee
Member
Posts: 129
Joined: 10:02 am Mar 08 2014
Country:

Re: KDX 200 Clutch Spring Direction

Post by Timtee »

You can run it without the judder springs.
Dekon
Supporting Member II
Supporting Member II
Posts: 674
Joined: 07:54 am Jun 26 2012
Country:
Location: Rhode Island

KDX 200 Clutch Spring Direction

Post by Dekon »

I put mine with the large side facing in on the plates and the thin side against the clutch hub. But like Timtee, you do not have to run it. When I got my '89, it didn't have it and the clutch worked fine. Being OCD, when I replaced my clutch I put one in.
Post Reply