Coolant Plug in Underside of Cylinder?

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

Well, got my dual sport all back together (or so I thought). Had planned to heat cycle and ride it last night until I started pouring the coolant in... and it just poured out on the floor :whistle: . Looks like I neglected to replace the coolant plug in the underside of the cylinder :doh: I spent an hour or two searching and can't find the plug anywhere.

Anyone know the size of said plug? I know that it's not shown on the OEM part diagrams. I have read on here some where that one person claims it is an M16x1.5 metric plug. I saw on TT that someone claims a 3/8" pipe plug is the size. The 3/8" seems more feasible to me, size wise, but I feel like it probably is some weird metric size. M16 just seems too large, thats bigger than 5/8". Just wanted to see if anyone could tell me for sure? If its a 3/8", I can get one no prob. If its a metric size, I will have to order.
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
Timtee
Member
Posts: 129
Joined: 10:02 am Mar 08 2014
Country:

Re: Coolant Plug in Underside of Cylinder?

Post by Timtee »

It is definitely a tapered plug. I would be surpised if it wasnt metric.

Just go to the hardware store and get the appropriate sized pipe thread tap and plug and take care of it in a few minutes.
User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 5770
Joined: 05:11 am Aug 23 2009
Country: USA
Location: Tucson, AZ, USA
Contact:

Coolant Plug in Underside of Cylinder?

Post by SS109 »

I wish I could remember but it's already been too long since I did mine. I do remember it took a metric allen wrench. Sorry. We need to confirm what it is for sure so others can find the info in the future.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

SS109 wrote:We need to confirm what it is for sure so others can find the info in the future.
Agreed, bigtime. Couldn't find the answer anywhere besides two people on TT saying they used 3/8 plugs. I'll grab a 3/8" NPT plug and give it a try in the next couple of days and see how it fits. I would happily order some metric plugs and do some trial and error to find the right size, I just don't know where to begin.

I sent an email to both RB-Designs and FRP Racing to see if either of those experts would happen to know. I don't know where else to turn if not! I guess I will just go ahead with searching for and ordering plugs for trial and error. I will update once (or if) I hear back.
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

Well. Ron Black is unsure of the size, but he thought it may have been M16 also. He recommended I ask Powerseal USA if they know or have one. Powerseal replied back with "we can weld that hole closed for $20 because it isn't used for anything". Guess I'm going to be buying a whole bunch of plugs and trying to figure out what I need :whistle:
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

Just placed an order with Bel-Metric for an M16, M14, M12, and M10 plug. I also am going to get a 3/8" Pipe plug to try.

I'll get to the bottom of this one way or another!
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Coolant Plug in Underside of Cylinder?

Post by KDXGarage »

Hey. Just saw this thread!

It is 3/8".


JUST KIDDING! :razz: Good luck with it. :mrgreen:
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

I happened to remember that a friend of mine who I met on craigslist (not the personals :lol: from selling/trading kdx parts) had several good cylinders in his collection. He is going to let me have one, should be back in business in the next couple of days :boogie: dont worry, I'll still try to figure out what it is once and for all! Stoked that there are still good people out there that are willing to help ya out!
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

CONFIRMED! The thread size for the coolant plug on the underside of the cylinder is most certainly M16x1.5. I tried a 3/8" NPT and it would start into the hole but stop. Here is a link to a plug if you need it, got mine from Belmetric, saw that Fastenal also sells them: https://belmetric.com/stainless-taper-m ... P16X1.5TSS
Last edited by Tyl3r on 01:35 pm Dec 16 2022, edited 1 time in total.
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Coolant Plug in Underside of Cylinder?

Post by KDXGarage »

Thanks for the follow up! :supz:
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

Heck yea, hopefully it will benefit someone down the road!
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
JZ05220r
Supporting Member II
Supporting Member II
Posts: 564
Joined: 12:36 pm Mar 28 2021
Country: United States

Re: Coolant Plug in Underside of Cylinder?

Post by JZ05220r »

This is incorrect info. It is not an m16x 1.5. My thread gauge proves that at least the thread pitch is a SAE 19 (on the SAE side of the tool with number 19 on the correct key). Not sure about the diameter. I bought the same one and threads are finer on the oem thread plug. Picture of aftermarket plug followed by the oem.
Attachments
IMG_0284.jpeg
IMG_0284.jpeg (1.77 MiB) Viewed 13373 times
IMG_0281.jpeg
IMG_0281.jpeg (1.7 MiB) Viewed 13374 times
2005 KDX220r 1991 KDX200 2022 KTM 500excf
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Coolant Plug in Underside of Cylinder?

Post by KDXGarage »

Thanks for the pictures and info!
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1335
Joined: 06:51 pm Nov 26 2012
Country: USA
Location: SW Pennsylvania

Re: Coolant Plug in Underside of Cylinder?

Post by Tyl3r »

Where can you find an SAE 19 pitch plug that would fit this? I did a quick google and couldn't find one.

I wouldn't say that the M16x1.5 is incorrect though, my bike has 6 years of fairly hard riding on it with no signs of leakage at the plug. Valid solution in my book!
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
JZ05220r
Supporting Member II
Supporting Member II
Posts: 564
Joined: 12:36 pm Mar 28 2021
Country: United States

Re: Coolant Plug in Underside of Cylinder?

Post by JZ05220r »

Tyl3r wrote: 10:19 am Aug 23 2023 Where can you find an SAE 19 pitch plug that would fit this? I did a quick google and couldn't find one.

I wouldn't say that the M16x1.5 is incorrect though, my bike has 6 years of fairly hard riding on it with no signs of leakage at the plug. Valid solution in my book!
Yea I can’t find one anywhere. And technically it’s incorrect but realistically it will work. The m16 x1.5 will thread in and stop just before it’s flush with the surface, this is because the threads begin to bind and not because of the taper. I would use the m16 x 1.5 plug but I would definitely want to use a thread sealer. In reality it’s a one time thing and the plating company I sent my cylinder to shouldn’t have ever removed it, after getting my cylinder back the oem plug is now bottoming out way past flush inside the water jacket of the cylinder. I sent it out with the plug flush with the surface.
2005 KDX220r 1991 KDX200 2022 KTM 500excf
JZ05220r
Supporting Member II
Supporting Member II
Posts: 564
Joined: 12:36 pm Mar 28 2021
Country: United States

Re: Coolant Plug in Underside of Cylinder?

Post by JZ05220r »

Tyl3r wrote: 10:19 am Aug 23 2023 Where can you find an SAE 19 pitch plug that would fit this? I did a quick google and couldn't find one.

I wouldn't say that the M16x1.5 is incorrect though, my bike has 6 years of fairly hard riding on it with no signs of leakage at the plug. Valid solution in my book!
Did you use any sealer for yours? Thanks
2005 KDX220r 1991 KDX200 2022 KTM 500excf
Kawibunga
Supporting Member III
Supporting Member III
Posts: 65
Joined: 05:35 pm Sep 13 2021
Country: Canada
Location: Calgary, AB.

Re: Coolant Plug in Underside of Cylinder?

Post by Kawibunga »

As my day job is at a machine shop, I will try to sort out exactly what this plug really is. Makes not sense to me it would be NPT or BSPT on a Japanese bike, but ya never know....... I too have a leaking plug

New rebuild fired right up first kick on Monday, and she's weeping out of the plug......... so plan A is to clean up the original and use a bit of really good PTFE tape, (I hate the paste).......... plan B is to use a 16x1.5 plug I picked up on amazon. Plan C is to use potentially a 3/8" BSPT plug (not NPT, British Pipe Thread) which is actually 19 TPI and a bit over 16mm, Plan D is to use a 3/8 NPT plug which is 18 TPI and a bit over 16mm........... something has to seal, it's not like we're high pressure! Will post results.....

And a good bit of info found here.....
https://trimantec.com/blogs/t/thread-id ... tion-guide
Go Riders!
User avatar
Chuck78
Supporting Member II
Supporting Member II
Posts: 609
Joined: 06:20 pm Nov 30 2016
Country: USA
Location: Columbus, OH

Re: Coolant Plug in Underside of Cylinder?

Post by Chuck78 »

Kawibunga wrote: 02:11 pm Oct 03 2023 As my day job is at a machine shop, I will try to sort out exactly what this plug really is. Makes not sense to me it would be NPT or BSPT on a Japanese bike, but ya never know....... I too have a leaking plug

New rebuild fired right up first kick on Monday, and she's weeping out of the plug......... so plan A is to clean up the original and use a bit of really good PTFE tape, (I hate the paste).......... plan B is to use a 16x1.5 plug I picked up on amazon. Plan C is to use potentially a 3/8" BSPT plug (not NPT, British Pipe Thread) which is actually 19 TPI and a bit over 16mm, Plan D is to use a 3/8 NPT plug which is 18 TPI and a bit over 16mm........... something has to seal, it's not like we're high pressure! Will post results.....

And a good bit of info found here.....
https://trimantec.com/blogs/t/thread-id ... tion-guide
I'm eager to hear your results, as PowerSeal USA seems to have removed mine to strip and clean my cylinder, and never reinstalled it nor returned it to me!
'97 KDX220R - purple/green! - KLX forks, Lectron, FMF, Tubliss
'99 KDX220R project - '98/'01 RM125 suspension, Titanium hardware, Lectron Billetron Pro, Tubliss
'77 Suzuki PE250 & '83 Suzuki PE175 Full Floater - restomod projects
'77 Suzuki GS750-844cc, '77 GS400/489cc & '77 GS550/740cc projects
'62 GMC 1000 Panel Truck
'88 Suzuki Samurai TDI/Toyota swaps
'88 Toyota 4x4 pickup
Kawibunga
Supporting Member III
Supporting Member III
Posts: 65
Joined: 05:35 pm Sep 13 2021
Country: Canada
Location: Calgary, AB.

Re: Coolant Plug in Underside of Cylinder?

Post by Kawibunga »

[/quote]I'm eager to hear your results, as PowerSeal USA seems to have removed mine to strip and clean my cylinder, and never reinstalled it nor returned it to me!
[/quote]

OK, so still waiting on a few things, but what I have confirmed is it's definitely not the 16X1.5 metric, which is in agreement with JZ05220r. Which really surprises me. I don't have 19 TPI pitch gauge, that's coming Friday, but you I could see that the 18 was just a bit off, so think it's the 19. I'll stick it on the optical comparator at work tomorrow over lunch as an extra check (forgot it at home today)

So it really does look to me like a 3/8" BPST thread, a few more measurements will confirm.

But I did end up fixing it. Originally I put the plug back in the first time with paste, and I could not thread it down tight enough for what I wanted. When it was flush, I could have still gone another full turn fairly easy. It leaked. So on the weekend I installed the plugs I ordered off amazon. These plugs were slightly longer, seemed to be the identical thread on initial measurement (but still confirming that 100%) With it being longer. I got it to tighten up way nicer while threading in. I also used good PTFE tape instead, felt really nice threading in........... and Bingo, got a good seal, no leaks at temp!

You can see that the plug is orignaly flush, I could have easy went in another turn from here........
PXL_20231008_161650616.jpg
PXL_20231008_161650616.jpg (2.33 MiB) Viewed 12791 times

Here's the new plug vs original, you can see it's a wee bit taller
PXL_20231008_162956388.jpg
PXL_20231008_162956388.jpg (2.76 MiB) Viewed 12791 times
Here it's installed, nice an tight (not over tight) and sitting slightly proud. Threaded in nice. After the fact I will now take a few more measurements and report back. But these worked great. Here's what I ordered.......
PXL_20231008_163006433.MP.jpg
PXL_20231008_163006433.MP.jpg (4.97 MiB) Viewed 12791 times

They call them both NPT and BSSP which is obviously wrong, you can't be both, NPT is slightly larger OD and 18 TPI while BPST 19 TPI and slightly smaller OD.......... it still makes no sense to me that it's not a metric thread, but that's what I've found out so far. More to come once I take some final measurements........
Go Riders!
JZ05220r
Supporting Member II
Supporting Member II
Posts: 564
Joined: 12:36 pm Mar 28 2021
Country: United States

Re: Coolant Plug in Underside of Cylinder?

Post by JZ05220r »

Was just doing a tune up on a 18 hp Briggs and Stratton V twin yesterday. The oil drain bolt was very similar looking to the ones on our cylinders. I doubt it will work but might be worth checking.
2005 KDX220r 1991 KDX200 2022 KTM 500excf
Post Reply