I have an H model BTW.KIPS Valve Alignment
-
bergilong
- Member
- Posts: 42
- Joined: 12:59 pm Aug 13 2016
- Country: USA
- Location: Arkansas
KIPS Valve Alignment
I tried my hardest to get this thing aligned and I am almost certain that I did, but how can I be sure. I was doing this top end with the engine in the frame, so it was kind of hard to see. This isn't my picture, I was using it as reference. I have an H model BTW.
I have an H model BTW.
Last edited by bergilong on 01:04 pm Mar 17 2017, edited 1 time in total.
-
JL4049
- Member
- Posts: 86
- Joined: 06:25 pm Jun 04 2016
- Country:
- Location: Eastern Victoria, Australia
Re: KIPS Valve Alignment
Does the wee dot not line up with the line on the rod? If so that picture is spot on.
-
bufftester
- Platinum Member
- Posts: 3458
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
-
bergilong
- Member
- Posts: 42
- Joined: 12:59 pm Aug 13 2016
- Country: USA
- Location: Arkansas
Re: KIPS Valve Alignment
That's not my picture. I was using it as a reference. How would I be able to tell my powervalve when it's running?
-
bufftester
- Platinum Member
- Posts: 3458
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: KIPS Valve Alignment
On the left side of the engine you can remove the round cover and run the engine. around 6k rpm you should see the valve rotate. This video shows it pretty well.