2001 KDX200H (SR?) subframe tags

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
bertos883
Member
Posts: 13
Joined: 03:31 am May 14 2016
Country:

2001 KDX200H (SR?) subframe tags

Post by bertos883 »

Hey lads,

I have an aussie '01, and there's a few tags and that sort of thing welded onto the subframe under the rear fender, and I always find them with my fingers when i'm putting the bike up on the stand or dragging it over a tree. Before I take a grinder to them, does anyone know what they're originally intended for?

images are a little large so find them here:


cheers fellas!
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 2001 KDX200H (SR?) subframe tags

Post by KDXGarage »

Welcome to the forums. USA models don't have that. Since some guy commented about the plastic thing being removed, is it a tag holder device that mounts to that area?

Look on google images for the SR model and see what went back there.

Blinker mounts??
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
bertos883
Member
Posts: 13
Joined: 03:31 am May 14 2016
Country:

Re: 2001 KDX200H (SR?) subframe tags

Post by bertos883 »

yeah cheers. It looks like the indicators were mounted to a large plastic piece that sat under the fender, i'm going to assume that's what the tabs were for, and the pins must just be for when you're tying something onto the fender. Either way, I think they're coming off!
MaverickAus
Supporting Member I
Supporting Member I
Posts: 128
Joined: 04:19 am Jul 27 2015
Country: Australia
Location: NSW

Re: 2001 KDX200H (SR?) subframe tags

Post by MaverickAus »

1st one is a occy strap hook
2nd one looks like blinker mount or something similar
3rd on is there a nut welded there?
bertos883
Member
Posts: 13
Joined: 03:31 am May 14 2016
Country:

Re: 2001 KDX200H (SR?) subframe tags

Post by bertos883 »

Nah, no nut, it looks like something clips in, probably the tailplate with the indicators etc.
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: 2001 KDX200H (SR?) subframe tags

Post by bufftester »

Yes, those are the brackets for the rear fender extension which holds the tag and indicators. The pin like ones are attachment points for bungie straps for use with the rear rack which was common on the SRs.
Post Reply