Throttle cable routing help....

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
Davenay67
Member
Posts: 59
Joined: 05:42 pm Apr 06 2014
Country:
Location: Lisle, IL

Throttle cable routing help....

Post by Davenay67 »

Searched all over the place, but not finding a definitive answer to my question.

I am working on jetting the carb and this is a good chance to put in my new throttle cable. The old one is starting to fray at the end that goes to the top of the carb.

Anwway, as it is routed now it seems to take too many bends for my liking. Is this the correct routing?

Image
User avatar
ced64k
Supporting Member
Posts: 174
Joined: 07:50 am Oct 30 2014
Country:
Location: Belgium
Contact:

Throttle cable routing help....

Post by ced64k »

Check your pm :)
Davenay67
Member
Posts: 59
Joined: 05:42 pm Apr 06 2014
Country:
Location: Lisle, IL

Re: Throttle cable routing help....

Post by Davenay67 »

Hmmmm.

It says I am not authorised to read my Private Messages. I will have to look into that one....
MarioM3
Member
Posts: 45
Joined: 09:01 am Dec 09 2015
Country:
Location: Pittsburgh, Pa

Re: Throttle cable routing help....

Post by MarioM3 »

As per the manual, that kinda looks correct. Its supposed to go over the frame bar but looks like it should be under that middle rad bolt. (you will have to check the top as your picture doesn't show). Here is s link to a picture of the manual. I'm at work now, but can take picture for you later.

https://www.google.com/search?q=kdx+thr ... jYSTN4M%3A

Mario
Post Reply