another needle question....
-
- Supporting Member
- Posts: 216
- Joined: 06:01 pm Dec 31 2012
- Country: USA
- Location: port orchard, washington
another needle question....
Hey guys, was hoping to get some feedback on what needles perform better for the H series 200 as opposed to stock. And where you feel its an improvement.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: another needle question....
CEL and DEL are the recommended needles for H series. Lots of info on them in the jets and needles section. They are richer on the low end, so re-jetting is needed after install. Overall the profile seems better suited to the KDX. CEL has a more abrupt hit, DEL is very smooth over the throttle range.
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: another needle question....
^very well stated.
I currently use a DEL, but my favorite were the JD needles.
I currently use a DEL, but my favorite were the JD needles.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: another needle question....
I haven't had the opportunity to try the JD needles, but it's definitely on my bucket list to do so.
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
Re: another needle question....
Years ago I got a used kit on eBay for about 1/2 price. That was the only way I could pull it off.
I really wish he would sell the needles only and at a lower cost than the "kit".
I really wish he would sell the needles only and at a lower cost than the "kit".
-
- Supporting Member
- Posts: 216
- Joined: 06:01 pm Dec 31 2012
- Country: USA
- Location: port orchard, washington
Re: another needle question....
Thanks for the replies. Never knew the jetting and needle secrion existed!