need torque specs for the following bolts
-
- Supporting Member I
- Posts: 62
- Joined: 06:34 am Jul 18 2014
- Country:
- Location: Pennsauken , new jersey usa
need torque specs for the following bolts
hey cant buy a book for another 2 weeks need torque specs for clutch casing,clutch cover,nut for crankshaft-water pump primary,please any info will help
- ICRage42
- Supporting Member
- Posts: 598
- Joined: 07:24 am Jan 09 2013
- Country:
- Location: Kawasaki, Ninja Ohio
Re: need torque specs for the following bolts
gabe you can get a hold of me today sometime just send me a text. I don't have my manual in the house its out in the garage but I can look those up for you later on in the day till you get your manual.
If you cant fix it with a hammer, you have an electrical problem.
-
- Supporting Member I
- Posts: 62
- Joined: 06:34 am Jul 18 2014
- Country:
- Location: Pennsauken , new jersey usa
Re: need torque specs for the following bolts
sweet your the man
- KDXGarage
- KDXRider.net
- Posts: 14068
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: need torque specs for the following bolts
I am not certain, but most of the little bolts seem to be 78 INCH-pounds, if I remember correctly.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member II
- Posts: 444
- Joined: 09:55 pm May 08 2011
- Country:
- Location: butler mo USA
need torque specs for the following bolts
right engine cover bolts 78 inch/lbs
clutch cover bolts 78 in/lbs
kick pedal nut 36 foot/lbs
clutch spring bolts 78 in/lbs
clutch hub nut 65 ft/lbs
primary gear nut 58 ft/lbs
water pump impeller nut 87 in/lbs
water pump elbo bolts 78 in/lbs
water pump cover bolts 87 in/lbs
clutch cover bolts 78 in/lbs
kick pedal nut 36 foot/lbs
clutch spring bolts 78 in/lbs
clutch hub nut 65 ft/lbs
primary gear nut 58 ft/lbs
water pump impeller nut 87 in/lbs
water pump elbo bolts 78 in/lbs
water pump cover bolts 87 in/lbs