KDXRIDER.NET

Hi guys,

so last component to my rebuild is the radiators. my current ones are completely destroyed and am going to replace them.

To begin the radiators themselves…any suggestions so far i have found a single pair of what seem to be crappy Chinese ones for $240!
any alternatives would be greatly appreciated

Second the larger issue. the hoses i have only been able to find OEM parts which are $$$$ and I am trying to save pennies (I'm only 15)

any alternatives there are countless options for the H series how ever non for E series?? could i possible convert this brackets?


kind regards

sach

If you cant find any 89-94 E series rads you can also look for 89 kx250(direct bolt on) or 91-94 KDX250. Possible to use the KX500 left side, but I think the right would be too long. In the absence of E-model ones your best bet is to use the H series radiator on an E but you have to make a bracket for the upper mount on one of the sides, right I think but can't remember right off hand. Ebay is your best bet for rads and hoses, just have to look real hard. A quick ebay look and I found both radiators and all hoses for less than $60

for the record, kdx250 radiators are NOT bolt on.

They are, but for the left side only. The right side KDX250 rads will not bolt on.