Page 1 of 1
Resonator chamber spacer
Posted: 06:39 pm Feb 08 2014
by C George
Has anybody ever tried one of these ?
It's a 3/16 to 1/4" spacer that increases the size of the resonator.
If I'm correct , I believe the resonator itself makes the exhaust
tract slightly longer at low rpm's.
I'd like to try one on the 200.
Re: Resonator chamber spacer
Posted: 12:57 am Feb 10 2014
by KDXrider1989
If you mean resonator as in expansion chamber or header pipe, then yes you will notice a little more low-end grunt at the expense of a few hundred rpm's on top end pull. theres many threads already on here about it
Re: Resonator chamber spacer
Posted: 06:19 am Feb 10 2014
by C George
The resonator chamber is on the left side of the engine cylinder. a rectangular box roughly 1.5 x 3.0"
The exhaust goes in there when the aux. ports are closed.
Re: Resonator chamber spacer
Posted: 07:15 am Feb 17 2014
by Julien D
Yes, someone used to make one at some point, but I haven't seen or heard of one in a while. And I believe you are correct, should add low end power.