V Force 3 Gasket..
Posted: 05:13 am Dec 31 2010
Will an OEM gasket work with a V Force 3 reed block, or is the Moto T version (#G03) different in some way?
Thanks.. Tom
Thanks.. Tom
Page 1 of 1
Posted: 09:38 am Jan 01 2011
Hmm. Not sure. The V-Force comes with gaskets, so I installed them without ever matching them up to the OEM ones. I suspect that this will be the case with most users. One would *think* that they would be the same, or very similar...
Posted: 10:18 am Jan 01 2011
I got an OEM gasket, was doubting there could be much difference. We'll find out. 
Posted: 11:06 am Jan 01 2011
if not, gasket paper or liquid gasket :P
Posted: 10:12 am Jan 03 2011
No difference. The big cast aluminim piece on the motor side didn't change 
Posted: 12:11 am Jan 05 2011
I used the oem on mine b/c I got the set used and it worked just fine.
Posted: 12:27 am Jan 07 2011
Stock gasket works fine with boysen my reed cage.
Posted: 04:19 am Jan 07 2011
Sounds like I'm in good shape then. Got this one from Ebay too, so nothing with it. Main concern was if it required a thicker gasket for some reason. Now I just need some decent (warm) enough weather to get the bike out and put it on.
Thanks for the replies and info everyone.
Thanks for the replies and info everyone.