Will an OEM gasket work with a V Force 3 reed block, or is the Moto T version (#G03) different in some way?
Thanks.. Tom
V Force 3 Gasket..
- OLHILLBILLY
- Supporting Member I
- Posts: 286
- Joined: 08:34 pm Feb 10 2009
- Country:
- Location: S. W. Missouri
V Force 3 Gasket..
2004 KDX 200.. Coupla mods
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
-
- Member
- Posts: 498
- Joined: 03:44 pm Jul 30 2009
- Country:
Hmm. Not sure. The V-Force comes with gaskets, so I installed them without ever matching them up to the OEM ones. I suspect that this will be the case with most users. One would *think* that they would be the same, or very similar...
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
- OLHILLBILLY
- Supporting Member I
- Posts: 286
- Joined: 08:34 pm Feb 10 2009
- Country:
- Location: S. W. Missouri
-
- Member
- Posts: 301
- Joined: 08:26 pm Aug 18 2009
- Country:
- OLHILLBILLY
- Supporting Member I
- Posts: 286
- Joined: 08:34 pm Feb 10 2009
- Country:
- Location: S. W. Missouri
Sounds like I'm in good shape then. Got this one from Ebay too, so nothing with it. Main concern was if it required a thicker gasket for some reason. Now I just need some decent (warm) enough weather to get the bike out and put it on.
Thanks for the replies and info everyone.
Thanks for the replies and info everyone.
2004 KDX 200.. Coupla mods
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness