V Force 3 Gasket..

Got questions? We got answers....
Post Reply
User avatar
OLHILLBILLY
Supporting Member I
Supporting Member I
Posts: 286
Joined: 08:34 pm Feb 10 2009
Country:
Location: S. W. Missouri

V Force 3 Gasket..

Post by OLHILLBILLY »

Will an OEM gasket work with a V Force 3 reed block, or is the Moto T version (#G03) different in some way?
Thanks.. Tom
2004 KDX 200.. Coupla mods
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
gregp
Member
Posts: 498
Joined: 03:44 pm Jul 30 2009
Country:

Post by gregp »

Hmm. Not sure. The V-Force comes with gaskets, so I installed them without ever matching them up to the OEM ones. I suspect that this will be the case with most users. One would *think* that they would be the same, or very similar...
2004 Dual Sported KDX200
1999 Ninja 250 (Daughter's)
1996 DR 650 (stock, mostly street use)
User avatar
OLHILLBILLY
Supporting Member I
Supporting Member I
Posts: 286
Joined: 08:34 pm Feb 10 2009
Country:
Location: S. W. Missouri

Post by OLHILLBILLY »

I got an OEM gasket, was doubting there could be much difference. We'll find out. :grin:
2004 KDX 200.. Coupla mods
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
moto_psycho

Post by moto_psycho »

if not, gasket paper or liquid gasket :P
User avatar
fuzzy
KDXRider.net
KDXRider.net
Posts: 3437
Joined: 01:29 pm Jun 18 2003
Country:
Location: Fredneck, MD

Post by fuzzy »

No difference. The big cast aluminim piece on the motor side didn't change :mrgreen:
'91 KDX 200 Project $300 KDX
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
jbowens2401
Member
Posts: 301
Joined: 08:26 pm Aug 18 2009
Country:

Post by jbowens2401 »

I used the oem on mine b/c I got the set used and it worked just fine.
joe96
Member
Posts: 3
Joined: 12:35 am Dec 04 2010
Country:
Location: illinois

Post by joe96 »

Stock gasket works fine with boysen my reed cage.
User avatar
OLHILLBILLY
Supporting Member I
Supporting Member I
Posts: 286
Joined: 08:34 pm Feb 10 2009
Country:
Location: S. W. Missouri

Post by OLHILLBILLY »

Sounds like I'm in good shape then. Got this one from Ebay too, so nothing with it. Main concern was if it required a thicker gasket for some reason. Now I just need some decent (warm) enough weather to get the bike out and put it on.
Thanks for the replies and info everyone. :grin:
2004 KDX 200.. Coupla mods
2009 KX250F.. Track Star
2007 Hayabusa.. Street Madness
Post Reply