Page 1 of 1

KDX200 clicking noise

Posted: 03:49 pm Dec 20 2010
by SCouch
Purchased a 2001 KDX200 this past weekend, and have a few questions. This is my first 2-stroke and it is taking some getting used to, but I loved riding it. I have done some reading and research, so I don't have any oil questions, but didn't run across these answers anywhere.

The bike makes a clicking noise at idle or lower rpm, but goes away as the rpm is increased. I figured this to be the KIPS valve or reed valves, it wasn't something that really bothered me, and the bike seems to run fine.

What is a good/best service manual?

Thanks!

Posted: 04:02 pm Dec 20 2010
by Julien D
kips rattle, yes. No worries

Factory service manual is good, cyclepedia's manual that you can get from the link at the top of this page is probably best.

Posted: 04:56 pm Dec 20 2010
by SCouch
Thanks!

Posted: 06:19 pm Dec 20 2010
by Julien D
Sure thing. Welcome to kdxrider, and enjoy your bike!

Posted: 06:52 pm Dec 24 2010
by kdxtreme
First time I heard it I thought the crank bearings were going but then you just tune it out after awile.