chain slide & guide kit.

cornishwrecker220 · Post by **cornishwrecker220** » 05:20 pm Dec 02 2010

does anybody know if the stock chain slider & rear guide from a 220 is inter-changable with that of say an early 90`s kx125?...reason being i fancy upgrading my stock kit with a nice green one from the` tm designworks` catalogue (ive used these before on my ktm with great results)...sadly they dont make one for the kdx!..but they do for the kx .

Mildew · Post by **Mildew** » 06:30 pm Dec 03 2010

88-96 KX 125/250 use the same part number as the 89-06 KDX

Post by **Mr. Wibbens** » 08:28 pm Dec 03 2010

>|QBB<[/url]

Mildew wrote:88-96 KX 125/250 use the same part number as the 89-06 KDX

On what part?

I looked up chainslider and they were different

cornishwrecker220 · Post by **cornishwrecker220** » 12:34 pm Dec 04 2010

thanks guys...i have just checked on their web ( & a done a little research ) & the kit for a 2006/7 kxf 250 chain slider part number is the same as the 96/97 kx125 which is the same as 02/ 03 kdx, & the rear guide that fits the 2006/07 kxf & 96/97 kx, will fit 2000/2003 kdx ..

Post by **Mr. Wibbens** » 12:50 pm Dec 04 2010

I'm sure not seeing any matching numbers

Chainslider for a 06 KX250f 12053-0053

Chainslider for a 03 KDX 12053-1328

cornishwrecker220 · Post by **cornishwrecker220** » 01:38 pm Dec 04 2010

hmmm interesting as i only have 1 part number for the chain slider & its the same as both the kxf/kx & kdx..12053.( the other numbers are not listed only 12053 which lists as `chain guide).i shall invesigate a little deeper..thanks for pointing that out!

Post by **Mr. Wibbens** » 01:48 pm Dec 04 2010

I'm using Ron Ayers fiche

http://fiche.ronayers.com/Index.cfm/Mod ... p/Swingarm

OLHILLBILLY · Post by **OLHILLBILLY** » 04:55 pm Dec 04 2010

cornishwrecker220 wrote:hmmm interesting as i only have 1 part number for the chain slider & its the same as both the kxf/kx & kdx..12053.( the other numbers are not listed only 12053 which lists as `chain guide).i shall invesigate a little deeper..thanks for pointing that out!

I notice on the Ron Ayers fiche, that the #12053 is pretty universal, but there is a lot of "A, B, C, D, etc..", type action going on after the "12053" too.

Post by **Mr. Wibbens** » 05:02 pm Dec 04 2010

its the second number that matters

cornishwrecker220 · Post by **cornishwrecker220** » 05:42 pm Dec 04 2010

i`m unable to send the link but but check out `cornwallkawasaki.co.uk` you can search their parts web for mx bikes (97 kx/2006 kxf 03 kdx) & see that there`s only 1 set of numbers listed for the chain guide etc.

Post by **Mr. Wibbens** » 05:46 pm Dec 04 2010

it's not a kawi number then

cornishwrecker220 · Post by **cornishwrecker220** » 11:21 am Dec 05 2010

the shop is a registerd kawasaki dealership so i would assume the parts fiche is a genuine kawasaki item ..the illustrations appear to be identical to that on the ron ayres site but without the secondary part numbers..why they do not appear alonside the other numbers i have no idea....i shall contact them for more info & hopefully shed some light on that fact.

Post by **Indawoods** » 01:36 pm Dec 05 2010

The first number is a place marker.... the second is like a revision number. It determines the exact part.

It's like "CARB" "38MM"

KDXRIDER.NET

KDXRIDER.NET

chain slide & guide kit.

chain slide & guide kit.