Page 2 of 3
Posted: 03:39 pm Dec 16 2010
by Klammer
Autoclutch and rear hand brake makes super steep single track down hills and stair steps really easy. Off camber down hill, when you can't put your foot on the pedal, the rear brake is in your hand. Like riding a mountain bike. Most trick woods bikes here in Cal are set up this way. You have both clutch lever and rear brake lever on the left. One shorty lever and one long.
Posted: 04:01 pm Dec 16 2010
by Indawoods
Ah... OK. I know allot of guys were using a hydralic rear brake handle on the full autoclutches that first came out mainly because the bar was bare and it made sense to have something there like a rear brake.
I would like to see that setup.
Posted: 04:22 pm Dec 16 2010
by Klammer
The KTM in this video has the setup, can be seen at the end. When I get a chance I will get some better pics of the setup. Problem with his setup is the KTM has both hydraulic clutch and brake, so the two masters interfear with each other causing a big spread between the levers. I'm working on a bracket to solve this problem,although he is used to it now. The riding area is Rowher Flats near Los Angeles.
http://klammer.smugmug.com/Motorcycles/ ... YgTVf-A-LB
Posted: 08:16 pm Dec 22 2010
by SS109
Any word yet? I know I won't get one until February but I'm still anxious!
Posted: 09:31 pm Dec 22 2010
by Indawoods
No word yet....
Posted: 12:36 am Dec 23 2010
by Klammer
Indawoods wrote:No word yet....
I was hoping you'd say - preorder now at $289.00. Just wishful thinking.
Posted: 03:37 pm Dec 23 2010
by Indawoods
I will state this in this thread and the others covering the REVLOC Dyna Ring...
Prices are going to slightly increase after the first of the year. They will still be far cheaper than anywhere else however as I do have some control. 
Posted: 11:56 pm Jan 06 2011
by Mr. Wibbens
Can't even get one yet and the price went up ?
Posted: 12:05 am Jan 07 2011
by Indawoods
If you haven't noticed... everything went up... cost of materials went up worldwide.
Posted: 12:08 am Jan 07 2011
by Mr. Wibbens
My beer is still the same price
Posted: 12:24 am Jan 07 2011
by Indawoods
Pabst should be free....
Still cheaper than you can get it anywhere.... and it would not even be made if I wouldn't have convinced Alan that he could sell them. Thanks for the vote of confidence there Wibby... I knew I could count on ya...
Posted: 12:48 am Jan 07 2011
by SS109
Indawoods wrote:...and it would not even be made if I wouldn't have convinced Alan that he could sell them.
Yeah, I'm still waiting.
Posted: 12:48 am Jan 07 2011
by Mr. Wibbens
Don't be bad mouthing my PBR now
Posted: 12:51 am Jan 07 2011
by Mr. Wibbens
I already sold one for you guys
Had a buddy join up just so he could get in on the deal
That guy with the KDX255 or whatever it is
Posted: 12:55 am Jan 07 2011
by Mr. Wibbens
actually I could go for some free PBR now that you mention it
Posted: 01:15 am Jan 07 2011
by Indawoods
I sent him a email to see where we are at.... I will let you know when he emails me back....
Posted: 06:30 pm Jan 11 2011
by dfeckel
Want want want want want want want want want want want...
Posted: 08:10 pm Jan 11 2011
by SS109
dfeckel wrote:Want want want want want want want want want want want...
Yeah, I know how you feel!
Posted: 11:16 am Jan 13 2011
by Indawoods
They are ready for sale!!!!!
The only difference is they do not come with clutch plates, Alan states that the orginal plates are better than what he can supply. They do come with the steel plates however.
Make sure you use the dropdown menu to choose the E series Revloc area of the PayPal payment, otherwise you will be recieving an H series Revloc.
Thanks guys and give a report!
Posted: 11:25 am Jan 13 2011
by Klammer
Indawoods wrote:They are ready for sale!!!!!
The only difference is they do not come with clutch plates, Alan states that the orginal plates are better than what he can supply. They do come with the steel plates however.
Make sure you leave me a note that you want the E series Revloc in the notes area of the PayPal payment, otherwise you will be recieving an H series Revloc.
Thanks guys and give a report!
Inda, I just sent you a paypal but I didn't find the note section when I sent it. I want the E model, paypal sent from Richard Russell.