Last week my kill switch stopped working all of a sudden. Since I just installed a Revloc Auto Clutch I really need a way to kill the bike. I removed the switch and tried touching the two wires together and that did nothing. Can someone give me some tips on how to diagnose this thing.
Edit: I am thinking it is something besides the switch. I took the switch apart and it is so simple that I don't see how it has failed. Plus, shouldn't the bike have died when I touched the two wires?
Kill Switch Stopped Working
-
- Member
- Posts: 76
- Joined: 08:54 pm Jul 16 2010
- Country:
- Location: Nashville, TN
-
- Member
- Posts: 76
- Joined: 08:54 pm Jul 16 2010
- Country:
- Location: Nashville, TN
-
- Member
- Posts: 76
- Joined: 08:54 pm Jul 16 2010
- Country:
- Location: Nashville, TN
Headlight still works.
I removed the tank and checked each connection all the way back to the air box. I then unscrewed the ground and checked it and it seemed to be fine. What else could it be? The black wire with the white stripe leads to a small black box by the air filter. Could that be the issue?
I removed the tank and checked each connection all the way back to the air box. I then unscrewed the ground and checked it and it seemed to be fine. What else could it be? The black wire with the white stripe leads to a small black box by the air filter. Could that be the issue?
-
- Member
- Posts: 76
- Joined: 08:54 pm Jul 16 2010
- Country:
- Location: Nashville, TN
-
- Member
- Posts: 76
- Joined: 08:54 pm Jul 16 2010
- Country:
- Location: Nashville, TN