1989 KDX200-E1
I have a leaky seal on the shaft for the clutch actuator. Can this be replaced from the top?
Also... I put a full quart (946ml) of trans fluid in the gearbox. Would that extra amt cause the seal to leak from over filling?
Leaky Seal
- blimpman
- Supporting Member II
- Posts: 221
- Joined: 07:05 pm Oct 23 2007
- Country:
- Location: Central Florida
Leaky Seal
Brian
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
I wouldn't worry about it
Mines been leaking for almost 8 years
And ya, the more you put in the more it'll leak
Mines been leaking for almost 8 years
And ya, the more you put in the more it'll leak
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- Coop
- Supporting Member
- Posts: 180
- Joined: 03:52 pm Sep 24 2010
- Country:
- Location: Acme, PA
You can't get the arm out with side cover on because of the way it fits with the push rod, and the seal can't be removed with the rod in place. So to change that seal you would need to pull that side cover.
I would replace it, but I am a little OCD and can't have anything on my bike that I know is broken/failing LOL.
I would replace it, but I am a little OCD and can't have anything on my bike that I know is broken/failing LOL.
"Twenty years from now, you will be more disappointed by the things that you didn't do than by the ones you did do" - Mark Twain
2003 KDX200
2003 KDX200