KDXRIDER.NET

Those definitely LOOK much nicer than my stock yz250 pegs, as you can see when you look at my first pic. If I bend or break these I'll definitely be looking for some.

How was it seating the springs? The yz250 ones I used had a little thin metal piece I was able to poke the end of the spring through.

Same with these. Just swap the springs from side to side and they go right in with no mods. They really don't hold any tension on the pegs though. I'm going to try and figure a way to change that but haven't given really any thought yet. Here is a link to a quick vid to show how much play is there. As you can see, it is quite a bit. http://s5.photobucket.com/albums/y180/K ... nt=peg.mp4

That's about how much play mine have. Doesn't bother me a bit when riding, I don't even notice it.

Yeah, that's why I have really thought about it! It works and that is all I care!

SS109 wrote:Just got my set of Ebay special pegs for my build.

The pegs are listed for "90-05 Yamaha YZ 80 125 250 500 WR 200 500 Honda XR 350 500".

I ordered these footrests on Ebay, received and adapted, this is perfect! thank you for the tip!

I did not have to grind the same place , just a corner..



as you can see there is little thickness to remove

I am having some difficulty sourcing the pegs. So far a listing from China and two which I believe are the correct ones from the U.S.

Is there a specific listing I should be looking at?

http://www.ebay.com/itm/Gray-Foot-Pegs- ... bf&vxp=mtr

maybe

http://www.ebay.com/itm/Yamaha-YZ-80-12 ... 50&vxp=mtr

http://www.ebay.com/itm/VOLAR-MOTORSPOR ... 86&vxp=mtr

I think 3 links are for the same items..

have checked my Ebay history and mine comme from the seller in your first link (lovemotor2014)
(have that in my Ebay acount :

Gray Foot Pegs For Yamaha YZ 80 125 250 500 YZ125 WR 200 ... (400552725183)