KDX250SR Jetting with FMF Fat pipe and DEP tail pipe ?

Got questions? We got answers....
Post Reply
wildrat
Member
Posts: 7
Joined: 04:33 pm Jan 11 2010
Country:

KDX250SR Jetting with FMF Fat pipe and DEP tail pipe ?

Post by wildrat »

KDX250SR Jetting with FMF Fat pipe and DEP tail pipe
have had bike for 4 years in shed bought as runner blown crank seals
just had piston blow found out was fitted with 145 main jet WTF
standard is 165 I think as only have the manual for the non SR model

Has any one got the sizes for standard and how much difference for the fat pipe ??
thanks john :prayer: :prayer:
nearma12
Member
Posts: 87
Joined: 10:20 pm Feb 20 2009
Country:
Location: Illinois

Post by nearma12 »

I don't know about the SR model, but the standard model came stock with 45/165 jets. 145 seems pretty lean. I run a 152 in my KDX250. The stock jets are very rich so most people don't keep them in long, unless they like changing plugs every 30 min.

Again, I only have info on the standard KDX250. But, when I put my FMF pipe on, I had to drop from 158 to 152 on the main.
Post Reply