Page 1 of 1
Handlebar riser
Posted: 07:22 am May 05 2010
by ejweick
I'm looking for an inexpensive set of handlebar risers for my KDX 200. I'm not having much luck looking in my usual internet bike parts stores. Can anyone suggest a specific brand/model? Or better yet, does anyone have a set they want to part with?
Posted: 09:39 am May 05 2010
by KDX4ID
You can flip the stock bar clamps around. That will get the bars out of your lap at least.
I use a whole different triple clamp set-up. It gives the bike a modern feel.
Posted: 10:08 am May 05 2010
by scheckaet
check rocky mountain, they have bar riser fairly cheap, from tusk I believe.
Posted: 12:04 pm May 05 2010
by Mr. Wibbens
Love my Rox Risers
http://www.roxspeedfx.com
On my E, an ordinary riser does nothing but make the bars closer to the rider
But with Rox I can raise them up and away
Posted: 12:11 pm May 05 2010
by Julien D
My buddy just put Rox anti-vibe risers on his KTM. I love them. Very very nice.
Posted: 09:47 am May 06 2010
by fuzzy
Cool stuff, which ones do you have wibs?
Posted: 12:02 pm May 06 2010
by Mr. Wibbens
>|QBB<[/url]
fuzzy wrote:Cool stuff, which ones do you have wibs?
Elite 2" Rise x7/8" stem clamp x 7/8" and/or 1-1/8" Handlebar Dual Sport Pivoting Risers
These Rox Pivoting Risers allow you to clamp a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1-1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set this is the riser to go with. Always check and confirm that your bike has adeguate cable and brakeline length before installing any handlebar risers.
Posted: 12:10 pm May 06 2010
by Mr. Wibbens
Need to make a different mount for my odo so I can move them up some more
Posted: 12:35 pm May 06 2010
by Indawoods
Nice.... won't do a darn thing for a Scotts stabilizer though.....
Posted: 03:00 pm May 06 2010
by Mr. Wibbens
First couple rides it loosened up
But now it's rock solid, even in a get off it has not moved
Posted: 03:01 pm May 06 2010
by Mr. Wibbens
Indawoods wrote:Nice.... won't do a darn thing for a Scotts stabilizer though.....
??
Scott's mount to the bars?
Posted: 03:10 pm May 06 2010
by Indawoods
Top Clamp.....
May work... have to go look at my setup.
Posted: 03:20 pm May 06 2010
by Mr. Wibbens
I swear I've seen em mounted underneath the bar somewhere
Posted: 04:32 pm May 06 2010
by fuzzy
Posted: 04:52 pm May 06 2010
by Julien D
Scotts top clamp mount wouldn't work on that angled bar mount triple anyway.
If you had a regular triple, looks like you could use the solid upper bar clamp to secure the rox risers at the lower mount point. The risers should give enough height then for the bar to clear the stabilizer. Maybe?
Posted: 05:30 pm May 06 2010
by KDX4ID
Here is my set up. BRP top clamp 1 3/4" rise and a Scotts.
Posted: 05:34 pm May 06 2010
by Indawoods
>|QBB<[/url]
Mine is turned 180 of those pics.....
Posted: 05:50 pm May 06 2010
by Mr. Wibbens
Like this
