Broken clutch actuator

Got questions? We got answers....

Broken clutch actuator

Postby Tharrell » 12:46 pm Apr 25 2010

1991 KDX 250 the cast part that holds the cable, in front of the actuator arm.
The squid I bought it from used clear silicone to hide it. I didn't see it because the bike was wet. Anyway, anybody got a fix for this?
I know I can use a screw and fender washer, I've seen some other bikes that actually had a manufactured part that bolts on the engine. Just wondering if it's been addressed here or if anyone has some personal experience with it. Thanks
Tharrell
Member
 
Posts: 12
Joined: 06:24 am Apr 25 2010
Location: Mount Airy, NC
Has thanked: 0 time
Been thanked: 0 time

Postby Rick » 05:29 pm Apr 25 2010

Mine was the same way, on the exact same bike.....silicone and all. I made a bracket that bolts on to the cylinder stud and bent it to hold pressure against the cable. Havent had a problem out of it.
Yes, they really do let me drive the Train!
1991 KDX 250 $Sold but not forgotten....
1996 Suzuki DR 350 $Sold!
2002 Honda CR 250 worth more than my house at this point........ :-)
2004 DR 650se Road Warrior
2002 DL1000 V-STROM
User avatar
Rick
Platinum Member
Platinum Member
 
Posts: 914
Images: 0
Joined: 09:24 pm Nov 10 2006
Location: Independence,KY
Has thanked: 0 time
Been thanked: 0 time

Postby Tharrell » 04:35 pm Apr 28 2010

I saw one like that, used the cylinder bolt. That seems to be the best alternative.
Tharrell
Member
 
Posts: 12
Joined: 06:24 am Apr 25 2010
Location: Mount Airy, NC
Has thanked: 0 time
Been thanked: 0 time


Return to KDX General Q&A

Who is online

Users browsing this forum: KawE30 and 8 guests