Bogging
-
- Member
- Posts: 20
- Joined: 06:53 am Mar 26 2010
- Country:
Bogging
Having troubles with bogging at WOT. The bike is a 220 completely stock with airbox lid removed at this time. I have cleaned the carb and it idols fine. and seams to run fine when gradually accelerating until the upper rpms hit then it boggs right out, almost feels like the choke is on or its starving for air. While this is happening the exhaust is very smokey. What do you think?
- scheckaet
- KDXRider.net
- Posts: 3740
- Joined: 12:09 am Nov 10 2005
- Country:
- Location: edmond oklahoma
what size jets (main and pilot), what needle do you have? (I assume they are stock)
what altitude are you riding?
If it's all stock, you're probably running too rich, try smaller main.
Also make sure your jets are not plugged up, they may look clean but can be plugged out, use a fine wire to clean them (like a guitar string )
A good starting point here:
http://www.kdxrider.net/forums/viewtopic.php?t=1156
good luck
what altitude are you riding?
If it's all stock, you're probably running too rich, try smaller main.
Also make sure your jets are not plugged up, they may look clean but can be plugged out, use a fine wire to clean them (like a guitar string )
A good starting point here:
http://www.kdxrider.net/forums/viewtopic.php?t=1156
good luck
02 KX 200 hybrid: RB head and carb
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156
-
- Supporting Member I
- Posts: 115
- Joined: 02:16 pm Feb 22 2010
- Country: