Putting it all back together and the plug wire just doesn't seem quite right. I have to put a pretty good bend in the wire to get the boot over the plug. Can someone post a photo of the proper alignment for the wire?
Thanks
Photo of spark plug wire routing
-
- Member
- Posts: 38
- Joined: 11:38 pm Nov 02 2009
- Country:
Photo of spark plug wire routing
2004 KDX 200
RB Carb and Head mods, 2002 KX 125 Forks, air box lid removed, VForce 3 Reeds, PC Platinum 2 EC, gripper seat cover, Renthal bars, Fredette chain guide, and some other odds and ends
RB Carb and Head mods, 2002 KX 125 Forks, air box lid removed, VForce 3 Reeds, PC Platinum 2 EC, gripper seat cover, Renthal bars, Fredette chain guide, and some other odds and ends
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
How does YOUR manual show it?
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
-
- Member
- Posts: 192
- Joined: 09:39 pm Dec 01 2004
- Country:
- Location: Huntsville Al
does this help any? mine is routed by the left radiator as you can see in somewhat decent focus just behind that hose. considering I took the picture after midnight during spring break with a camera that has no flash, trying to position shop lights for the pic after I lost $10 bucks in a long a$$ beer drinking card game at my hose this evenin.
its a '04 KDX 220 cadillac
-
- Member
- Posts: 192
- Joined: 09:39 pm Dec 01 2004
- Country:
- Location: Huntsville Al
-
- Member
- Posts: 38
- Joined: 11:38 pm Nov 02 2009
- Country:
Thanks bronco, that helps.
The manual wasn't very helpful. Didn't really show how the wire should be routed.
The manual wasn't very helpful. Didn't really show how the wire should be routed.
2004 KDX 200
RB Carb and Head mods, 2002 KX 125 Forks, air box lid removed, VForce 3 Reeds, PC Platinum 2 EC, gripper seat cover, Renthal bars, Fredette chain guide, and some other odds and ends
RB Carb and Head mods, 2002 KX 125 Forks, air box lid removed, VForce 3 Reeds, PC Platinum 2 EC, gripper seat cover, Renthal bars, Fredette chain guide, and some other odds and ends
-
- Member
- Posts: 192
- Joined: 09:39 pm Dec 01 2004
- Country:
- Location: Huntsville Al
-
- Member
- Posts: 192
- Joined: 09:39 pm Dec 01 2004
- Country:
- Location: Huntsville Al