KDXRIDER.NET

I replaced the clutch, fibers and steels, on my 98 KDX220 about two months ago. I used the Tusk brand. Have about 5 hours on them and all of a sudden, no clutch. Tore it down to find all the fiber gone from one side of the second set from the outside. It was completely gone. I did soak all fibers overnight in oil as I always have. The clutch was adjusted correctly. I've just never had it happen before. Could I be missing something or do they simply come off from time to time like brake pads do? All the others looked fine. I ordered a new set. This time I ordered an EBC Upgrade DRC Kevlar Series Clutch Kit. Hope it works!

It could be that they just let go... Tusk is a cheap brand. It could be that you stacked them wrong.... hard to tell at this point but the damage is done and you have a better set on the way.....

I've liked the stuff I got from tusk with the exception of the clutch plates I got. They didn't fit the basket right, and I had to hand fit them with a file. I call it 'blueprinting' LOL I don't have an hour on them so I can't speak to your problem, but will let you know if mine bite the dust too!

Ones I'm using are probably cheaper than the Tusk ones

I don't even remember the brand, got 'em on ebay for $40