Anti-sieze, grease, or nothing?

Got questions? We got answers....
Post Reply
SOARSKI
Supporting Member I
Supporting Member I
Posts: 60
Joined: 02:00 am Aug 16 2009
Country:
Location: MO

Anti-sieze, grease, or nothing?

Post by SOARSKI »

I've just finished greasing my my swing arm and uni-link. Everything looked good but had to replace two seals.

What are you guys putting on the smooth part of the bolts that go through the sleeve? Anti-sieze, grease or nothing?
KarlP
Supporting Member III
Supporting Member III
Posts: 1484
Joined: 02:26 pm Jun 29 2005
Country:
Location: Alabama

Post by KarlP »

I slather 'em up with two fingers of grease. Wipe the excess off after insertion.

Keeps everything from rusting up, ya know....
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
SOARSKI
Supporting Member I
Supporting Member I
Posts: 60
Joined: 02:00 am Aug 16 2009
Country:
Location: MO

Post by SOARSKI »

>|<>QBB<
KarlP wrote:I slather 'em up with two fingers of grease. Wipe the excess off after insertion.

Keeps everything from rusting up, ya know....
Greased it up, put back together. Thanks for the response.
Post Reply