lol - so you would need 2 XR400 clutch sets to do it?
then have some spares?
will keep my eyes peeled for the washers...
also sounds much easier (as CC has already posted elsewhere i believe) to lay the bike down horizontally.
good tip.
-=c
Gearbox/clutch question
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
If you're buying parts by the available already packaged 'For XR' method, the answer is, 'Yes.'
Or...Fredette sells (used to) repackaged Vesrah plates FOR the XR..with the correct number of plates for the KDX.
...the XR has one less plate than does the KDX.
I do think you will find the job easier if you lay the bike down horizontally.
...as opposed to laying it down vertically, I mean.
Cheers!
Or...Fredette sells (used to) repackaged Vesrah plates FOR the XR..with the correct number of plates for the KDX.
...the XR has one less plate than does the KDX.
I do think you will find the job easier if you lay the bike down horizontally.
...as opposed to laying it down vertically, I mean.
Cheers!
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
There 'ya go...asking pointed questions again........
I didn't know why that question came up..but I didn't ask why, either. I figgered maybe he wanted to assemble the clutch on a bench or something.
But, no. You're not wrong.
Although I'd want to know the washer is behind the basket....
I didn't know why that question came up..but I didn't ask why, either. I figgered maybe he wanted to assemble the clutch on a bench or something.
But, no. You're not wrong.
Although I'd want to know the washer is behind the basket....
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
- SS109
- KDXRider.net
- Posts: 5793
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Just curious, would the XR400 clutch work on the older KDX '89-'94 "E" series bikes?
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
Good question. The answer to which I don't know is 'Yes', or 'No'.SS109 wrote:Just curious, would the XR400 clutch work on the older KDX '89-'94 "E" series bikes?
Look up the OEM PN on an online 'fiche. If they're the same, you're good.
..which I don't think they are..but I don't know.
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!