Hi
I have a thing about older KDX's, 89-94 model that is.
I found a 1990, in great shape, looks like it hardly went offroad.
However the current owner says it has about 7000 miles on it .
Apparently this bike was dualsported and had a speedometer, not sure,
but then it broke down but owner (2d) says bike totals about 7k miles since purchased new by 1st owner .
Isn't that a bit high for such a bike ? It was used mainly on country side backroads and double tracks I guess. The current owner uses it for farming, he hardly rides it he says.
I am not looking for a tip top bike ready to race , it's just to play around but I don't like to ride beat up bikes. My experience tells me this particular bike I am looking at (in pictures) won't need a lot of repairs as far as the chassis is concerned (bearings etc.) my concern is the engine since it's been used on the road. Owner says it runs great (like new, but I don't believe it). From buying a new KX 125 in 94, I know these bikes engine if not maintained professionally (as per the manual) lose power after a few years.
Can you make the engine like new (i.e. running and sounding like new) at a reasonable cost (no more than the price of the bike itself , $1000 labor incl.) .
From the noise some of these KDX make on Youtube, I can tell they would need a lot of work.
Also since 1990 was only the second production year for that model, is there anything to look for as far as factory issues ?
Thanks a bunch for any info you contribute.
Piston was changed once
Checking out a 1990 KDX with high mileage
-
- Member
- Posts: 3
- Joined: 04:24 am Jun 10 2009
- Country:
- Indawoods
- Creator and Founder
- Posts: 9951
- Joined: 09:59 am Jun 12 2003
- Country:
- Location: Midwest
Wow... you really don't know much about KDXs. Put a topend on it ($200) Replace the rear wheel, swingarm and steering head bearings and grease real well, service the suspension and jet it... should be good to go.
To assume a 20 year old bike won't need bearings is a mistake... Ma Kaw didn't do much in the form of lubricating the bearings from the factory and if was bought by some who did not know this and simply rode the bike... I can almost guarantee it will need bearings.
The noise is a properly working KIPS. Nothing wrong with that and that is what people don't like about a KDX when they don't know anything about them.
To assume a 20 year old bike won't need bearings is a mistake... Ma Kaw didn't do much in the form of lubricating the bearings from the factory and if was bought by some who did not know this and simply rode the bike... I can almost guarantee it will need bearings.
The noise is a properly working KIPS. Nothing wrong with that and that is what people don't like about a KDX when they don't know anything about them.
*** Administrator //***
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
- 80elkster
- Supporting Member II
- Posts: 135
- Joined: 08:43 pm Jan 01 2006
- Country:
- Location: Maple Valley WA
Moto
Before you put a topend in it do a compression test, if your in between 119-185 PSI then you could ride it a while. My 93 had over 3,700 miles on it and 159 PSI compression, don't know its history. Been riding it for a couple years.
Yes I emphatically agree with Inda on the bearings, all my bearings were way past shot. Only the stearing head had any life left in it and there was hardly any grease in there.
To my knowledge there are not any chronic issues other than the KIPS valves are more susceptible to carbon buildup and weak compared to the 95 and up motors. I'd check that they rotate freely and choose a good synthetic premix (I've been using Mobile 1 but it is no longer available) that will keep the build up at bay. Oh I'm sure Inda can recommend a good premix.
Your gonna love that bike. Focus on the suspension first
Before you put a topend in it do a compression test, if your in between 119-185 PSI then you could ride it a while. My 93 had over 3,700 miles on it and 159 PSI compression, don't know its history. Been riding it for a couple years.
Yes I emphatically agree with Inda on the bearings, all my bearings were way past shot. Only the stearing head had any life left in it and there was hardly any grease in there.
To my knowledge there are not any chronic issues other than the KIPS valves are more susceptible to carbon buildup and weak compared to the 95 and up motors. I'd check that they rotate freely and choose a good synthetic premix (I've been using Mobile 1 but it is no longer available) that will keep the build up at bay. Oh I'm sure Inda can recommend a good premix.
Your gonna love that bike. Focus on the suspension first
06 DR650 Farkled
91 WR250 2T
00 300EXC (Sold)
79 XS850 (Sold)
79 CR250 (Sold)
78 IT400 (Stolen)
75 G5 100 Kawi (Gave it away)
73 F7 175 Kawi (Sold)
70 175 Brigestone (Recycled)
05 KDX200(Son's)
93 KDX200
75 KT250 Trials
250 Quads
Just glad to be ridin!
91 WR250 2T
00 300EXC (Sold)
79 XS850 (Sold)
79 CR250 (Sold)
78 IT400 (Stolen)
75 G5 100 Kawi (Gave it away)
73 F7 175 Kawi (Sold)
70 175 Brigestone (Recycled)
05 KDX200(Son's)
93 KDX200
75 KT250 Trials
250 Quads
Just glad to be ridin!
-
- Member
- Posts: 69
- Joined: 10:33 pm Mar 22 2009
- Country:
- Location: Detroit (Rock City!)
Totally depends on the price. You sort of implied that the guy wants $1000 for it, which IMO is *way* too much for a 20 year old dirtbike when you consider that you can probably get one that's only 4-5 years old for about the same money. (Ref: I bought an '06 for $1400 earlier this year and put mebbe $200 of mandatory parts on- chain, sprockets, bearings.)
I hear you regarding the old bikes, but don't get taken for a ride your own self.
I hear you regarding the old bikes, but don't get taken for a ride your own self.
-
- Member
- Posts: 3
- Joined: 04:24 am Jun 10 2009
- Country:
Yeah I know, but I didn't mention I am in Europe and they go for that price here, but in Euros ! So 1400 bucks, it's the usual price. They cost more than eur 4000 new which was upward of $5600.
You can get 95-98 models for 1200-1500 but those were more often raced, a lot of the E series were used by kids riding around town with some trail riding.
You can get 95-98 models for 1200-1500 but those were more often raced, a lot of the E series were used by kids riding around town with some trail riding.
-
- Member
- Posts: 78
- Joined: 08:41 pm Feb 12 2009
- Country:
- Location: Albuquerque, New Mexico